Program Trunk Names - Samsung DCS-408 System Administration Manual

Samsung
DCS-408 & 408i

Program Trunk Names

[MMC 404]
You can assign a name or identification to each C.O. line, up to 11 characters long.
The procedure for entering names is the same as described in Program Station
Names.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
'A' - Used to toggle upper and lower case.
ACTION
1. Open customer programming and select
2. Dial trunk (e.g., 72)
OR
Press UP or DOWN to select trunk and press the right
soft key to move the cursor
3. Enter the trunk name (e.g. SAMSUNG) and press the right
soft key to return to step 2
If you make a mistake, either press HOLD to clear the entire
entry or use the DOWN key to move the cursor back
4. Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
System Administration Guide
DISPLAY
404
[71] T R U N K N A M E
[72] T R U N K N A M E
_
[72] T R U N K N A M E
SAMSUNG
15
November 2001