Advertisement
Getting to know
your Modem
Front Panel
Back Panel
Your Modem
The LED lights on your Kogan Internet Moden will indicate
the status of your service.
1
2
3
4
5
6
7
Power
WLAN/WPS
USB Port
On/O
Phone
Gigabit
LAN Ports
Reset
LED Indicators
LED
1
Power
2
DSL
3
Internet
8
9
Wireless
4
2.4GHz
Wireless
5
5GHz
WPS
6
7
WAN
8
LAN
9
USB
Gigabit
DSL
WAN Port
Status
Indication
On
Power is on.
Off
Power is off.
On
DSL synchronization is complete.
Flashing
DSL synchronization is in progress.
Off
DSL synchronization failed.
On
Internet connection is available.
Off
No internet connection.
On
The 2.4GHz wireless radio band is enabled.
Flashing
The router is transmitting or receiving data via 2.4GHz band.
Off
The 2.4GHz wireless radio band is disabled.
On
The 5GHz wireless radio band is enabled.
Flashing
The router is transmitting or receiving data via 5GHz band.
Off
The 5GHz wireless radio band is disabled.
On/Off
Turns on when a WPS synchronization is established and
automatically turns off about five minutes later.
Flashing
A wireless device is trying to connect to the network via WPS.
This process may take up to 2 minutes.
On
A device is connected to the WAN port.
Flashing
The WAN port is sending or receiving data.
Off
No device is connected to the WAN port.
On
A device is connected to the LAN port.
Flashing
The LAN port is sending or receiving data.
Off
No device is connected to the LAN port.
The USB device is ready to use.
On
USB device is being identified, or data is being transferred.
Flashing
No USB device is plugged into the USB port.
Off
Advertisement
