Advertisement
Connecting to nbn once
your service is ready
When you receive an email from us that your
nbn™ service has been successfully
activated it's time to complete the setup of
your Kogan Internet modem.
Connecting your power supply
Set up your nbn
Broadband
TM
connection
Connect one end of the power adaptor to your
Kogan Internet Modem and the other end into a
power point and switch this on.
For FTTP (Fibre to the premises) and HFC connections:
You'll need to connect your Kogan Internet Modem to the NTD
(nbn™ connection box) in your home.
WAN PORT
For FTTP connections:
Connect the Ethernet cable (the one with the blue ends) and plug
one end into the blue WAN port of your Kogan Internet Modem
and the other end into the first UNI-D Port on your NTD which
nbn™ have installed, this port can be found on the bottom of
the NTD.
For HFC connections:
Connect the Ethernet cable (the one with the blue ends) and
plug one end into the blue WAN port of your Kogan Internet
Modem and the other end into the UNI-D Port on your NTD
which nbn™ have supplied, this port can be found on the
back of the NTD. Make sure that the NTD is plugged into the
wall power plug and turned on.
For FTTN connections:
Connect one end of the grey telephone cable directly into
your telephone wall socket, and the other end into the
grey DSL port on the Kogan Intenet Modem.
DSL PORT
Advertisement
