Table of Contents
Advertisement
012-06575A
The following pages give an overview of the Spectrophotometer equipment setup.
Step One: Prepare the Rotary Motion Sensor by
removing the thumbscrew, three-step pulley, and
rod clamp.
thumbscrew
Rotary Motion Sensor
Quick Start 1: Prepare Rotary Motion Sensor
Step Two: Prepare the Spectrophotometer Base by
removng the two small thumbscrews and Pinion
and by rotating the hinge away from the Base.
Spectrophotometer Base
Remove the
Pinion
Rotate the
hinge.
Quick Start 2: Prepare the Hinge
Step Three: Attach the Rotary Motion Sensor to
the Base hinge with the two small thumbscrews and
attach the Pinion to the Rotary Motion Sensor shaft.
Quick Start
Quick Start
three-step pulley
rod clamp
Remove the
thumbscrews.
Spectrophotometer Base
hinge
Use the thumbscrews to
attach the sensor.
Quick Start 3: Attach the Sensor and Pinion
Step Four: Put the Degree Plate/Light Sensor
Arm on the Base. Attach the Grating Mount,
Light Sensor Mount, and Light Sensor. Position
the Focusing Lens.
Light Sensor Mount with
Aperture Disk and Screen
Focusing
Lens
Grating
Mount
Degree
Plate
lock washer
wing nut
Quick Start 4: Degree Plate & Light Sensor Arm, Grating Mount,
Focusing Lens, Light Sensor Mount, and Light Sensor
1
Educational Spectrophotometer
Put the Pinion
on the shaft.
Rotary Motion
Sensor
Light
Sensor
threaded
Light
post
Sensor
Arm
Advertisement
Table of Contents
