Advertisement
Adjustments
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins Owner's
Manual before you make any adjustments.
Contact an Öhlins dealer if you have any
questions about setting up the shock absorber.
Spring Preload
Use the tool provided in this kit. Turn the
threaded ring on the shock absorber body.
Turn clockwise for harder adjustment, turn
counter clockwise to release the spring
preload.
Set-up Data
Recommended set-up
Spring Preload
3.5 mm
Shock Absorber Data
Length
295 mm
Stroke
48 mm
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Spring Preload Adjuster
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document.
Öhlins Racing AB
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
Part no. HO 944_2
Issued 2017-01-01
Box 722
www.ohlins.com
Advertisement
