Assembling The Vacuum Shredder - Stihl BG 56 Instruction Manual

English
Assembling the Vacuum
Shredder
Mounting the Elbow
3
1
Push the elbow (1) into the catcher
N
bag (2) as far as the mark (smaller
arrow).
Tighten strap (3) on catcher bag
N
and press down the tab (4).
NOTICE
Make sure the zipper on the catcher bag
is closed.
6
5
Line up the arrows (5).
N
Position the union nut so that the
N
symbol ‚ is in line with the arrows.
Push the elbow into the recess in
N
the fan housing stub (6) as far as
stop.
10
Push the union nut (7) over the fan
N
housing stub as far as stop.
2
4
Rotate the union nut (7) in direction
N
of arrow until symbol ƒ is in line
with the arrows – union nut snaps
audibly into position.
Assembling the Suction Tube
Line up the arrows on the suction
N
tube and extension tube. Push
together and lock in position.
Mounting the Suction Tube
Shut down the engine.
N
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
8
1
2
Insert screwdriver in the tab (1) and
N
press down to disengage the intake
screen (2) and then open the intake
screen.
3
4
Line up the arrows (3).
N
Position union nut (5) so that the
N
opening lines up with the arrows (3).
Push the suction tube into the fan
N
housing stub (4) as far as stop.
Push the union nut (5) over the fan
N
housing stub.