Assembling The Vacuum Shredder - Stihl SH 56 Instruction Manual

Assembling the Vacuum
Shredder
Mounting the Elbow
3
1
N Push the elbow (1) into the catcher
bag (2) as far as the mark (smaller
arrow).
N Tighten strap (3) on catcher bag
and press down the tab (4).
Make sure the zipper on the
catcher bag is closed.
8
6
5
N Line up the arrows (5).
N Push the elbow into the fan housing
stub (6) as far as stop.
N Push the union nut (7) over the fan
housing stub and turn it in the
direction of the arrow until the
tab (8) engages the opening (9) in
the union nut.
BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
Assembling the Suction Tube
2
4
N Line up the arrows on the suction
tube and extension tube. Push
together and lock in position.
Mounting the Suction Tube
N Shut off the engine.
N
Insert screwdriver in the tap (1),
swing it to the right to disengage the
intake screen (2) and then open the
intake screen.
1
2
3
6
4
N Line up the arrows (3).
N Push the suction tube into the fan
housing stub (4) as far as stop.
N Push the union nut (5) over the fan
housing stub and turn it in the
direction of the arrow until the
tab (6) engages the opening (7) in
the union nut.
N
Continue turning the union nut in
direction of arriw and tighten it down
firmly.
Removing the Elbow
N Shut off the engine.
N Insert a suitable tool through the
opening in the union nut to press
down the tab.
N Rotate the union nut in the direction
of the arrow as far as the stop.
N Removing the Elbow
English
13