Setting DRC
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
(Dynamic Range Compression)
REMOTE CONTROL
Press DRC button.
Each time you press this button, DRC : STD
•
will be selected in turn.
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press FUNCTION button 4 times.
"DRC SETUP" appears on the display.
•
3
Press SURROUND button.
"DRC : STD" appears on the display .
•
4
Press SELECT(
Each time you press this button, DRC : STD
•
will be selected in turn.
To Exit Setup Mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP MODE OFF" appears on the display and the unit exits Setup Mode.
Setting DRC
STD : Sets DRC effect to standard.
•
MAX : Sets DRC effect to maximum.
•
MIN : Sets DRC effect to minimum.
•
√
DRC : MAX
) button to set DRC.
,
DRC : MAX
DRC : MIN
DRC : MIN
25