Connecting The Fm And Am Antennas - Samsung 2.0060510083255e16 Instruction Manual

Connecting the FM and AM Antennas

If AM reception is poor, connect an
outdoor AM antenna(not supplied).
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM
75 COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
COOLING FAN
The cooling fan dissipates the heat generated inside the unit so that the unit can
be operated normally. The cooling fan is activated automatically to supply cool air
to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside may
•
rise and cause damage to it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
•
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied to the AM
and terminals.
2. If reception is poor, connect an outdoor single
vinyl-covered wire to the AM terminal.
(Keep the AM loop antenna connected).
AM Loop Antenna
(supplied)
15