Setting Digital Input; Setting Drc (Dynamic Range Compression) - Samsung HT-AS610 Instruction Manual

Setting Digital Input

You can set the digital input for a DVD/CD player to either OPTICAL or COAXIAL.
MAIN UNIT
1
Press SETUP button.
•
2
Press FUNCTION button 3 times.
•
3
Press SURROUND button to select the DVD or CD function.
•
4
Press SELECT(
•
To Exit Setup Mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP MODE OFF" appears on the display and the unit exits Setup Mode.
24
"SETUP MODE" appears on the display and enters into Setup Mode.
"DIGITAL IN" appears on the display.
Each time this button, DVD CD will be selected in turn.
) button to set the digital input.
,
Each time you press this button, OPTICAL COAXIAL will be selected in turn.
Setting DRC
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
REMOTE CONTROL
Press DRC button.
Each time you press this button, DRC : STD
•
will be selected in turn.
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press FUNCTION button 4 times.
"DRC SETUP" appears on the display.
•
3
Press SURROUND button.
"DRC : STD" appears on the display .
•
4
Press SELECT(
Each time you press this button, DRC : STD
•
will be selected in turn.
To Exit Setup Mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP MODE OFF" appears on the display and the unit exits Setup Mode.
Setting DRC
STD : Sets DRC effect to standard.
•
MAX : Sets DRC effect to maximum.
•
MIN : Sets DRC effect to minimum.
•
GB
√
DRC : MAX DRC : MIN
) button to set DRC.
,
DRC : MAX DRC : MIN
25