How To Replace The Fuse - CPI CDM12K Operating Instructions Manual

HOW TO REPLACE THE FUSE:

Stemshine is outfitted with a fuse to protect against overload. If the fuse blows, the machine
will not switch on and the light on the Main Switch (1) will not illuminate. If this happens,
proceed as follows:
1. Remove the plug from the power socket.
2. Using the appropriate screwdriver, remove the basket holder from the unit.
3. Remove the four screws that hold the front panel to the unit.
4. Gently remove the panel from the unit. Ensure that the fuses have blown and
replace them.
5. Reassemble the unit.
6. Plug in the unit and turn it on.
CPICDMOPINST Page - 19 SALES + SERVICE
(905) 829-2355
www.cpishine.com