Advertisement
Connect power to the DMP 44 LC by connecting the included 12 VDC
8.
external power supply to the rear panel power connector (see
previous page ). The wiring diagram is shown on the right.
Install the software. There are no hardware controls for the DMP 44 LC.
9.
All configuration and control is done via software. The control software,
DSP Configurator, is available on the included DVD or from the Extron
www.extron.com
website at
software help file contains all operation descriptions.
Software and Manual Download from the DVD
Insert the disk provided into the DVD ROM drive of the computer. If the setup program
1.
does not start automatically, run Launch.exe from the DVD ROM directory using Windows
"My Computer."
The opening screen will appear with the following tabs:
For the user guide, select the Manuals tab, then select the DMP 44 LC User Guide from the list of available
2.
documentation. The manual, in PDF format, will open in the browser window or can be downloaded to the hard drive
for future reference.
To download the DSP Configurator program, select the Software tab.
3.
From the Downloads page, on the DSP Configurator row (the downloads are listed in alphabetical order), select
4.
Install.
Choose Run and the DSP Configurator will install. In most cases it is best to accept the default installation suggestions.
5.
When the DSP Configuration program completes installation, the USB driver must be installed. Whether planning to use
6.
the USB configuration port or not, it is recommended to install it. Click Next on the USB Driver Installer and follow the
on-screen instructions.
When the USB driver installation completes, remove the DVD from the drive and reboot the computer.
7.
Launch the DSP Configurator program from the Extron Electronics group in the Start menu. Select
8.
"DMP 44 LC." The DSP Configurator help file contains details about using the software.
Software and Manual Download from the Website
Using any internet browser, go to
1.
From the Extron home page, select the DMP 44 LC from the Product Shortcuts drop-down menu.
2.
Select the Downloads tab on the DMP 44 LC product page.
3.
Select the User Guide from the list of available documentation and click on it to either view or download it to the hard
4.
drive for future reference.
To download the control software, on the Downloads tab select DSP Configurator.
5.
The link navigates to the selected software download page. Fill out the form, then download the software to the hard
6.
drive.
When the download is complete, locate the file (dsp_configurator_Vxxx.exe) on the hard drive and double-click on
7.
this file. The file is a self-executing installation program. In most cases it is best to accept the default installation
suggestions.
Proceed to Step 6 of the "Software and Manual Download from the DVD" section above.
8.
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron USA - West
Extron USA - East
+1.714.491.1500
+1.919.863.1794
+1.714.491.1517 FAX
+1.919.863.1797 FAX
2
(see the following sections). The control
www.extron.com
Extron Asia
Extron Europe
Extron Japan
+800.3987.6673
+800.7339.8766
+81.3.3511.7655
(Inside Asia Only)
(Inside Europe Only)
+81.3.3511.7656 FAX
+31.33.453.4040
+65.6383.4400
+65.6383.4664 FAX
+31.33.453.4050 FAX
© 2011 Extron Electronics All rights reserved.
a
Smooth
on the
.
Extron China
Extron Middle East
+4000.398766
+971.4.2991800
Inside China Only
+971.4.2991880 FAX
+86.21.3760.1568
+86.21.3760.1566 FAX
www.extron.com
Ridges
A
A
Power Supply
Output Cord
(5 mm) Max.
SECTION A–A
Smooth
Extron India
Extron Korea
+82.2.3444.1571
1800.3070.3777
Inside India Only
+82.2.3444.1575 FAX
+91-80-3055.3777
+91 80 3055 3737 FAX
68-1938-50 Rev. A 10 11
2-Pole Orange
Captive Screw
Connector
(12V)
3/16"
Ridges
Advertisement
