Sloan Act-O-Matic Showerhead AC-11-1.8 Repair Parts And Maintenance Manual

AC-11-1.8 4020132
Self-cleaning chrome plated showerhead with
thumb screw volume control and universal ball
joint. Pressure compensating 1.8gpm/6.8 Lpm
maximum flow control. All brass construction. 1/2''
I.P.S. inlet.
AC-11-2.0 4020130
Self-cleaning chrome plated showerhead with
thumb screw volume control and universal ball
joint. Pressure compensating 2.0 gpm/7.5 Lpm
maximum flow control. All brass construction. 1/2''
I.P.S. inlet.
AC-51 1.8 4021031
Self-cleaning chrome plated
showerhead without (less) thumb
screw volume control and universal
ball joint. Pressure compensating
1.8 gpm/6.8 Lpm maximum flow
control. All brass construction. 1/2''
I.P.S. inlet.
AC-51 2.5 4021000
Self-cleaning chrome plated
showerhead without (less) thumb
screw volume control and universal
ball joint. Pressure compensating
2.5 gpm/9.4 Lpm maximum flow
control. All brass construction. 1/2''
I.P.S. inlet.
AC-11 4020100
Self-cleaning chrome plated showerhead with thumb
screw volume control and universal ball joint. Pressure
compensating 2.5 gpm/9.4 Lpm maximum flow control.
All brass construction. 1/2'' I.P.S. inlet.

SHOWERHEAD REPAIR KITS

Code No. Part No. Description
For Standard Spray
4328470 N/A Repair Kit for Standard Spray Showerhead
includes Items Nos. 1-4 (below)
For Needle Spray
4328466
SH-1002-A Repair Kit for Needle Spray Showerhead
includes Items Nos. 1-4 (below)
Additional Repair Items
0328326PK SH-72
CP Ball Joint
0328068
SH-2N Coupling Ring Needle Spray (2.5 gpm)
4328004 SH-1015-A 1.8 Repair Kit (Flow Control Only)
4328001 SH-1014-A 2.0 Repair Kit (Flow Control Only)
4328469
SH-1008-A 2.5 Conversion Kit
4328287
SH-1004-A 2.5 Repair Kit - 2.5 Flow Control & SH-3
0328097 AC1A - 2.5 Shower Body Assembly (2 & 7 on Chart)
0328206 AC1A - 2.0 Shower Body Assembly (2 & 7 on Chart)
The information contained in this document is subject to change without notice.
LABELS:
BLUE COLOR 1.8
GREEN COLOR 2.0
BLACK COLOR 2.5
BLUE COLOR 3.0
OR ABOVE
GROVE INDICATES
SH-2-N.
(NO GROOVE
INDICATES
OBSOLETE SH-2)
3.0 GPM OR ABOVE
MODEL AC-51/AC-11
WITH VOLUME CONTROL SHOWN
Repair Parts and Maintenance Guide
Act-O-Matic Showerhead
®
PARTS FOR ACT-O-MATIC
Item
No. Code No. Part No.
1
3328026
1. SH-1007-A
0328059 AC-18-AV
0328213 AC-313-A
0328205
2. AC-313-A
5328010
3. SH-1000-A
2 0328010PK SH-3
3
4. 0328063 SH-45
0328209 C2A
0328001
5. SH-1
4
4328470
6. SH-1003-A
0328209 AC-2-A-1.8
0328207 AC-2-A-2.0
4328466 SH-1002-A
5
0328004
7. SH-2
0328005 SH-2-N
6
432846
— SH-1008-A
† Includes SH-3 gasket.‡ Chrome plated. Consult factory for other available finishes.* supplied only with 2.0 High
Efficiency Showerhead models.

FLOW CONTROL MODEL CONVERSION

To convert an older Act-O-Matic showerhead to a flow control model,
7
use repair kit SH-1008-A. Repair Kit contains gasket (item 2), piston
assembly – needle spray (item 4) and coupling ring – needle spray (item 5).

NEEDLE SPRAY

NOTE: To properly repair an Act-O-Matic showerhead, it is important to
identify needle spray part designs. Shower heads with 3 gpm (11 Lpm) or
2.5 gpm (9.4 Lpm) flow controls produced since 1985 use needle spray
piston assembly and a needle spray coupling ring. Needle spray shower
heads can be identified by the following: coupling ring (SH-2-N) has groove
on knurled diameter; plus an "N" marked on the back of the black spray
disc in the piston assembly. When repairing an Act-O-Matic shower head
with a flow control it is important to identify whether the part is of the needle
spray design.
SLOAN ACT-O-MATIC MODELS
®
In accordance with Federal and State water conservation requirements, all
Sloan Act-O-Matic showerheads manufactured after January 1, 1994 are
available only with an integral 2.5 gpm (9.4 Lpm) flow control. Replacement
components will continue to be available for non-flow control Act-O-Matic
showerhead models. Act-O-Matic showerheads rated at 3 gpm (11 Lpm)
should be repaired using the components shown for the current
2.5 gpm (9.4 Lpm) models.
For Sloan Act-O-Matic model 100 series
shower-heads (discontinued in 1970) use
piston assembly SH-1003-A and SH-2-N.
OBSOLETE
Standard Spray 3.0
Needle Spray 2.5
or Above
BLACK LABEL
290
SHOWERHEAD AC-11/AC-51 2.5 & 2.0, 1.8
®
Description
Ball Joint Coupling with Volume Control
Ball Joint Coupling less Volume Contro
1.8 Gallon Flow Control
2.0 Gallon Flow Control Assembly*
SH-3 Gasket – 24 per package
Single Gasket
Spacer*
Piston Assembly for Showerhead
Body
‡
OBSOLETE
Piston Assembly –
†
1.8 Piston Assembly – Shower Head
2.0 Piston Assembly – Needle Spray
Piston Assembly – Needle Spray
†
2.5 gpm Piston & Gasket (1 & 3)
OBSOLETE
Coupling Ring –
‡
Coupling Ring – Needle Spray SH-1002-A –
‡
available in SH-1008-A for 2.0 & 2.5 gpm
Repair Kit for Needle Spray Showerhead
includes Items Nos. 2-5 at left (2.5 gpm).
†
†