Giant D263SW Operator's Manual page 47

ANSI-Style and Common Safety Decal Location
M2
WARNING
Side stability is reduced when: 1) turning;
2) operating on rough terrain or
side slopes; and 3) carrying load raised.
N
WARNING
AVOID INJURY OR DEATH
Always follow "Mandatory Safety Shutdown
Procedure."
1
3
N
1) Lower equipment to ground.
2) Reduce throttle, apply parking brake.
3) Shift to neutral.
4) Stop engine, remove key.
AVOID OVERTURN
Carry load low.
Do not exceed Rated Operating
Capacity.
Avoid steep slopes and high speed
turns.
Travel up and down slopes with heavy
end uphill.
5103008-36-A
2
P
4
STOP
5103008-07-A
WARNING: Avoid Overturn
Side stability is reduced when:
1) turning; 2) operating on rough terrain or
side slopes; and 3) carrying load raised.
• Carry load low.
• Do not exceed Rated Operating
Capacity.
• Avoid steep slopes and high speed
turns.
• Travel up and down slopes with heavy
end uphill.
WARNING: Avoid Injury or Death
Located on the control column, facing the
operator.
Always follow "Mandatory Safety Shut down
Procedure."
1) Lower equipment to ground.
2) Reduce throttle, apply parking brake.
3) Shift to neutral.
4) Stop engine, remove key.
4.Safety
47