Table of Contents
Advertisement
4.Safety
used to cushion the blow, otherwise, serious injury to the eyes or other parts of
the body could result.
•
Stay clear from underneath the operator's platform as it is tilted.
•
Always secure the operator's platform in the tilted position with the tilt support.
Never allow anyone under the operator platform if the tilt support is not in
place.
•
Always secure the operator's platform to the chassis with anchor bolts, nuts
and washers before driving and using the machine.
•
Check operator's platform tilt components and tilt support components at regu-
lar intervals. Replace damaged or worn parts immediately.
•
Do not smoke or have any spark- or flame-producing equipment or materials in
the area while filling the fuel tank or working on the fuel or hydraulic systems.
•
Keep fuel and other fluid reservoir caps tight. Do not start the engine until caps
have been secured.
•
Always lower lift arm or elevated items, or securely support/secure them,
before performing any maintenance or service on the machine.
•
Do not attempt to remove the radiator cap after the engine has reached oper-
ating temperature or if it is overheated. At operating temperatures, engine
coolant is extremely hot and under pressure. Always wait for the engine to cool
before attempting to relieve pressure and remove the radiator cap. Failure to
heed this warning could result in severe burns.
•
Use solid support blocking. Never rely on jacks or other inadequate supports
when maintenance work is being done. Never work under any equipment sup-
ported only by jacks.
•
Refer to the parts manual for information about assembly of components.
Always use the correct parts and the proper torques - incorrect fastener con-
nections can dangerously weaken assemblies.
•
Exhaust fumes can kill. Do not operate the machine in an enclosed area
unless there is adequate ventilation.
•
Operators should also be aware of any open windows, doors or ductwork into
which exhaust gases may be carried, exposing others to danger.
•
Do not run the engine if repairs are being performed alone. There should
always be at least two people working together if the engine must be run
during service.
•
Always use adequate tools while working on the machine. Inappropriate tools
could break or slip, causing injury, or they may not adequately perform
intended functions.
•
Unless necessary for servicing the engine, do not open the engine cover while
the engine is running.
•
Do not use the machine when maintenance is scheduled to be performed.
Postponing maintenance can result in a serious reduction of the service life of
the machine, more serious and costly equipment failures, and contribute to
unsafe operating conditions.
36
Advertisement
Table of Contents
