Table of Contents
Advertisement
•
Remove all trash and debris from the machine every day, especially in the
engine compartment, to minimize the risk of fire.
•
Always face the machine and use the hand holds and steps when entering and
exiting the machine. Do not jump off the machine. See chapter "Operation".
•
Do not use other starting aids than the engine pre-heating. Engine pre-heating
can cause ether or other starting fluid to detonate, causing injury or damage.
•
Walk around the machine and inspect it before using it. Look for damage,
loose or missing parts, leaks, etc.
•
Warn all nearby personnel before starting the machine.
•
Check for proper tire pressure in all four tires before operating the machine
and add air if necessary. Improperly pressurized tires adversely affect machine
stability. Regularly check wheel fasteners for tightness. See chapter "Mainte-
nance".
•
Contact the proper local authorities for utility line locations BEFORE starting to
dig. In North America, contact the North American One-Call Referral System
at 8-1-1 in the U.S., or 1-888-258-0808 in the U.S. and Canada.
•
Below-ground hazards also include water mains, tunnels and buried founda-
tions. Know what is underneath the work site before starting to dig.
•
Before working near power lines (either above-ground or buried cable type),
always contact the power utility and establish a safety plan with them.
•
If temperatures are changing, be cautious of dark and wet patches when work-
ing or traveling over frozen ground. Stay away from ditches, overhangs and
other weak support surfaces.
•
The operator's area, steps and hand holds must be free of oil, dirt, ice and
unsecured objects.
•
If a lighting system is installed, check its operation before working in darkness.
•
Always keep lights, mirrors and windows clean. Poor visibility can cause acci-
dents.
•
NEVER start the engine if there is any indication that maintenance or service
work is in progress, or if a warning tag is attached to the controls.
•
Replace damaged safety decals and a lost or damaged operator manual.
•
Terrain and soil conditions at the work site, approaching traffic, weather-
related hazards and any above-or below-ground obstacles and hazards
should be observed and monitored by all work crew members.
•
Adjust the seat to allow full actuation of all controls. Never adjust the seat
during machine operation.
•
Read the operator manual provided with each attachment used with the
machine before starting the engine.
•
Before working on or with the machine, remove jewelry, tie back long hair, and
do not wear loose-fitting garments, such as, scarves, ties, unzipped jackets,
etc., which could become caught in the moving parts of the machine and
cause injury.
4.Safety
31
Advertisement
Table of Contents
