Residual Risks; Risk Reduction; Symbols On The Product - Ryobi RLT26CDSE Original Instructions Manual

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ injury caused by vibration
– Hold the product by designated handles and restrict
working time and exposure.
■ injury caused by exposure to noise
– Wear hearing protection and limit exposure.
■ injury caused by flying debris
– Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness and blanching
of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WHAT'S IN THE BOX
■ Lower boom and string head assembly
■ Powerhead and upper boom assembly
■ D-handle
■ Trimmer guard
■ Combination wrench
■ Speedwinder handle
■ Ethanol shield lubricant
■ Operator's manual

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy-duty gloves.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Do not install any type of blade on this
product.
This product is not intended for use
with a toothed saw type blade.
Rotational direction and maximum speed
of the shaft for the cutting attachment.
Handle position
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Keep hands away from blades
Regulatory Compliance Mark (RCM).
This product meets applicable regulatory
requirements.
"Run" position
"Full" position
"Half" position
PRIME - press the primer bulb 10 times
slowly.
Switch to "I/STOP" position
Squeeze throttle trigger to start / run.
Pull the starter rope to start.
3