Schedule
This menu is used to configure schedules for powering on and powering off the display
at preset times. Up to seven different schedules can be set.
Schedule List
o Select the schedule preset to configure.
o Range: 1~7
o Default: 1
Enable
o Make the selected schedule active. Available when On, Off, Input and Days of
the Week are configured.
o Options: Off, On
o Default: Off
On
o Set the time when the display will power on.
Off
o Set the time when the display will enter standby mode.
Days of the Week
o Select which days of the week the selected schedule is active.
o Options: Sun, Mon, Tue, Wed, Thu, Fri, Sat
o Default: None
Every Week
o Indicate whether the schedule is for the current week only, or for every week
going forward.
o Options: Off, On
o Default: Off
Planar VM Series User Manual
020-1357-00C
Operating the Display
Page | 51