Tiling Set - Planar VM55LX-X User Manual

20.3 Tiling Set

Bytes Bytes Description
DATA[0] 0x22 = Tiling- Set
DATA[1] Enable
DATA[2] Frame comp.
DATA[3] Position
DATA[4] V monitors, H monitors
Example: Set the Display to the following: Tiling Enabled Yes, Frame comp. No, Position 2, V
Monitors=2, H monitors = 3 (Display Address 01)
Monitor
Header Category Code0 Code1 Length
ID
0xA6 0x01 0x00
Example: Set the Display to the following: Tiling Enabled: Yes, Frame comp: keep as before, Position:
Keep as before, V Monitors, H monitors: keep as before (Display Address 01)
Monitor
Header Category Code0 Code1 Length
ID
0xA6 0x01 0x00
VM Series Displays RS232 User Guide
020-1359-00A
Bits
Data
Control
0x00 0x00 0x07 0x01
Data
Control
0x00 0x00 0x07 0x01
Description
Command reports Tiling Setting
0x00 = No
0x01 = Yes
0x00 = No
0x01 = Yes
0x02 = don't overwrite (keep previous
value)
0x00 = don't overwrite (keep previous
value)
0x01 = position 1
0x02 = position 2
till
0x00 = don't overwrite (keep previous
value)
0x01 = V monitors =1 H monitors =1
0x02 = V monitors =1 H monitors
=2 till
Data[0] Data[1] Data[2] Data[3] Data[4] Checksum
0x22 0x00 0x00 0x02
Data[0] Data[1] Data[2] Data[3] Data[4] Checksum
0x22 0x01 0x02 0x00
Miscellaneous
0x08 0x89
0x00 0x80
Page | 35