1/2000
ON
UTO
1/4000
OFF
0,
1/10K
ON
Note :
d
If IRIS mode is set to ELC, the SHUTTER menu will be
–
deactivated as you adjust the brightness using the
electronic shutter.
/120)
If the SENS-UP function is set to AUTO, only items of
–
r,
OFF and AUTO are available in the SHUTTER menu.
ect.
If the FLICKERLESS function is set to ON, the SHUTTER menu
–
es
will be deactivated.
ast
e
LC
Automatically detects the ambient level of
will
darkness in the dark or low contrast scene to
er
extend the accumulated time, keeping the image
bright and sharp;
s
❖
FLICKERLESS
DEO
If set to ON, the shutter speed will be fi xed to
1/100(PAL:1/120) second. This will prevent possible screen
distortion due to a mismatch between the vertical sync
FF
frequency and the blinking frequency of the lighting.
h
❖
XDR (eXtended Dynamic Range)
[OFF, LOW, MID, HIGH]
d
Actively controls the gamma compensation in the
way it operates the ambient luminance contrast
in a certain pixel unit to determine the optimal
visibility.
Select one from OFF, LOW, MID and HIGH.
R(S2)
Closing to HIGH will increase the compensation
level.
F
❖
WHITE BAL
If you want to adjust the color scheme, use the
F
WHITE BALANCE function.
•
DAY
F
In DAY mode, you can set the color values of
F
RED and BLUE. The screen will be displayed in
colors according to your settings.
How to use OSD Menu
OFF
ON
DAY/NIGHT
MODE
ON
ON
RED
BLUE
ON
ON
R-GAIN
B-GAIN
Note :
You can set the values of R-GAIN and B-GAIN only in
–
AWC mode.
If AGC is set to OFF or FIX, you can not access the
–
NIGHT menu.
–
For adjusting the white balance, the following
5 modes are provided:
•
ATW1(Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
[OFF, ON]
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
•
ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
•
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
•
3200K : Set color temperature to 3200K
•
5600K : Set color temperature to 5600K
–
RED : Adjusts the strength of the red color.
–
BLUE : Adjusts the strength of the blue color.
–
R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
[DAY/NIGHT]
–
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
–
WHITE BAL
DAY
AWC
[00]----I----
[00]----I----
[0248]
[0247]
English
19
–