Cisco UCS 6454 Installation Manual page 29

Installing the Cisco UCS Fabric Interconnect
Figure 8: Sliding the Chassis Into the Rack
Step 5
Stabilize the chassis in the rack by attaching the front rack-mount brackets to the front rack-mounting rails:
a) Insert 2 screws (12-24 or 10-32, depending on rack type) in each the two front rack-mount brackets (using
a total of four screws) and into the threaded holes in the vertical rack-mounting rail.
b) Repeat for the front rack-mount bracket on the other side of the chassis.
Figure 9: Attaching the Chassis to the Rack
Installing the Cisco UCS Chassis in a Cabinet or Rack
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
23