Verifying Network Registration Of The Modem - Wavecom Fastrack M1200 series User Manual

5.4

Verifying network registration of the modem

1. Using the Hyperterminal program, type the AT command AT+CREG?.
Value appears for the response.
2. Verify the result with the following chart:
Note: If the modem is not registered, perform the procedure for 'Verifying signal strength' to
determine the strength of the received signal.
confidential ©
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
Value Network registration
0,1 Yes
0,5 Yes
(registered roaming)
WM_MKT_Fastrack_UGD_001 - 002
September 2002
Page : 18 / 29