Setting Up Your Side-By-Side Refrigerator - Samsung RSA1D series User Manual

setting up your side-by-side
refrigerator
2. Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
then disconnect the wires by gently pulling them apart
. Remove hinge screws
off the upper hinge

. Next, remove the door from the lower hinge


1
and the ground screw

. Be careful that the door does not fall on you as you are removing it



using a screwdriver, and
1
.


by turning counter-clockwise, and take

by carefully lifting the door straight up

Be careful not to pinch
the water tubing and
wire harness on the
door.
.

setting up _11