Maintenance; Regular Error And Maintain Method - Vector VI 200 User Manual

6. Maintenance

6.1 Regular Error and maintain method
Error Reason instruction
1. the loaded weight
excess overload range of
max. capacity
Display
2. wrong connection
UUUUUU
with load cell or no
connection with it.
3. load cell unworkable
1. calibration is no good
2 、 cell single line is
connect a wrong line.
Display nnnnnn 3、the cell is bad.
during calibration, no
input added weight or
ERR1
input weight
max capacity.
Page 24 of 27
User Manual
Solution
1.decrease loaded weight
2. check load
connection
3. checking load cell：check
input and output resistance
to judge it is good or not.
1. check scale is resisted or
not, foot is kept level or not.
2. check load
connection.
3. checking load cell：check
input and output resistance
to judge it is good or not.
Input the correct weight
exceed
cell
cell