Power On; Zero Setting; Tare; Hold - Vector VI 200 User Manual

User Manual
3.2 Power on
Power on and indicator perform self-checking and go to weighing mode.
3.3 Zero setting
Within zero range, press "zero", indicator weighing is cleared. When
Indicator is not stable, zero is unworkable.

3.4 TARE

At the gross weight mode, if the weight is stable, pls. press "Tare" key , the
indicator will take the loaded weight as tare, and show net weight,
At this time the gross mode will change to net mode. The " net" and "tare"
light is on, and the net weight is zero

3.5 HOLD

C11=0 "hold" function unworkable
C11=1 PEAK HOLD
Press" HOLD" key, the Hold light is on, and show the Maximum data on the
Page 10 of 27