Table of Contents
Advertisement
User Manual
weight is below than the low limit, the "LO" light will on.. when the weight
is within the limit, the "OK" light is ok.
3.9 Print function
When the data is stable, connection with printer, it will be printed after
press"
"1 second.
Note：print the gross weight when at tare mode , if the net weight is zero.
Can not print.
4
Calibration
&
parameter
setting
4.1 Enter calibration
There have two methods to enter the setting menu:
1. when the switch" CAL" is off, Press"
" then press"
at the
same time, hold it, you will enter C08-C39 setting.
2. Take out the sealing screw on the back of indicator, then press
Page 13 of 27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VI 200 and is the answer not in the manual?
Questions and answers