Total - Vector VI 200 User Manual

User Manual
weighing indicator. Press " HOLD" key again to exit the hold function
C11=2 Data-hold
Press" HOLD" key, the Hold light is on, and show the data on the weighing
indicator. Press " HOLD" key again to exit the hold function
C11=3 Auto-hold
If the weight on the scales above 20d and keep stable, the indicator will show
the data for 6 seconds and the " hold" light Is on , after 6 seconds the
indicator back to general weighing, and the " hold" light is off
C11=4 Special Animal weighing function
Press" Hold" key, the indicator will show" LOC" for 3 seconds, the " hold"
light is on, During the 3 seconds, the indicator will catch the average weight
and show it.
Press" HOLD" key again to exit it

3.6 TOTAL

Accumulation operation
At Zero mode, load weight till stable, Press "TOTAL" key go to
accumulating
Mode," total" light on, display" n001", and then display loaded weight;
unload weight , back to zero, load weight again till stable. Press "TOTAL",
display"n002"
Then show the loaded weight. Repeat it maximum 999 times.
Page 11 of 27