Disconnecting; Playback; Operation; Power - Monoprice SB-200 User Manual

5. Select the MP34949 entry in the list. If you are prompted for a password, enter 0000
(four zeros). The voice prompt will say Paired and the LED Indicator will stop
flashing and will glow solid blue.

Disconnecting

Use one of the following methods to disconnect your device from the soundbar.
 Use the Source button on the soundbar or one of the non-BT SOURCE buttons on
the remote control to switch to a different input.
 Disable Bluetooth® on your device. The soundbar's voice prompt will say
Disconnected.
 Press and hold the PLAY/PAUSE/PAIR button on the remote control.
 Move your device out of Bluetooth radio range.

Playback

If your Bluetooth® device supports the AVRCP feature, you can use the PLAY/PAUSE/PAIR
button on the remote control to pause or resume playback. You can also use the
PREV/NEXT buttons on the remote to skip back to the previous track or forward to the
next track.

OPERATION

Power

 When you first connect the soundbar with AC power, it will automatically enter
Standby mode and the LED Indicator on the soundbar will glow solid red.
 Press the Power button on the soundbar or the POWER button on the remote
control to turn the soundbar On. The red LED Indicator on the soundbar will
extinguish and one of the other colored LEDs will illuminate to indicate the select
input.
14