Digital Optical - Monoprice SB-200 User Manual

distributed from the TV to the soundbar and the CEC feature allows you to use your TV's
remote control to control the volume level of the soundbar.
To use the HDMI® ARC audio input your HDTV must support both the ARC and CEC
features and the ARC feature must be turned on. You will also need a High Speed HDMI
Cable (not included) that supports both the ARC and CEC features. Check your TV's user's
manual to ensure ARC and CEC support and to see how to turn ARC on.
Perform the following steps to connect your TV to the soundbar.
1. Plug one end of a compatible High Speed
HDMI Cable into the HDMI (ARC) port on the
soundbar, then plug the other end into the
HDMI ARC port on your TV. The port may be
labeled differently on your TV.
2. Use your TV's menu system to turn ARC on.
Check your TV's user's manual to determine
how this is done.

Digital Optical

Perform the following steps to connect the soundbar using the digital optical input.
1. Remove the protective plug from the OPTICAL
input on the soundbar.
2. Using a digital optical audio cable (not
included), plug one end into the OPTICAL input
on the soundbar, then plug the other end into
the digital optical output on your audio source
device (TV, AV receiver, etc.).
11