WATERWHIZ™ 100
Product Code: C04001
WATERING DAYS START TIME
CODE :
CYCLE
NEXT
START
TIME
A B C D
WATER
DAY
EVERY
DELAY
AM
HRS
PM
DAY
TODAY
MIN
SU
MO
TU
WE
TH
FR SA
MANUAL
RESET
WaterWhiz™ 100
1. INSTALLATION
BATTERY
Remove the battery holder from the back of the timer
and insert 4x AA Alkaline batteries. securely replace
the battery holder back into the unit to ensure water
resistance.
Note: Do not use rechargable batteries.
INSTALLATION
Attach the timer to an outside tap and turn on the
water. Leave the water on while the tap timer is
attached.
Note: For ease of programming we suggest
programming the timer before attaching it to the tap.
Mode Button
+/- Button
OK Button
Cycle ABCD Button
Manual Watering Button
Battery Indicator
2. SETTING CURRENT TIME & DAY
WATERING DAYS START TIME
CODE :
CYCLE
NEXT START
TIME
A B C D
WATER
DAY
EVERY
DELAY
AM
HRS
DAY
PM
TODAY
MIN
SU
MO
TU
WE
TH
FR SA
MANUAL
RESET
� The 'Set Time' mode is automatically selected when
the timer is turned on (an arrow will be pointing to
'Set Time'). The current time & day must be set for the
timer to operate a schedule.
� Press
or
to select the current day. Press
the selected day.
� The time will now be flashing. Hold down
the minutes & hours. Holding
will automatically run
through the 24 hours changing the time from AM to PM.
� Press
to save the set time.
3.1 SETTING THE WATERING DAYS
INTERVAL SCHEDULING
WATERING DAYS START TIME
CODE :
CYCLE
NEXT START
TIME
A B C D
WATER
DAY
EVERY
DELAY
AM
HRS
DAY
PM
TODAY
MIN
SU
MO
TU
WE
TH
FR SA
MANUAL
RESET
Interval scheduling allows an interval program between
(1 to 7 days). Setting a schedule for every 3 days would
mean that the tap timer will run every 3 days.
� Press
until the end of (SA) to get to interval watering.
� Press
or to adjust the interval. Press
to save.
3. SETTING THE WATERING DAYS
Press
to change to the next mode.
WATERING DAYS START TIME
CODE :
NEXT START
TIME
WATER
DAY
EVERY
AM
PM
TODAY
SU
MO
TU
WE
TH
FR SA
MANUAL
RESET
'Water Day' is where you set the days you want the tap
timer to water.
� To select the watering day(s) press
� When
is over the selected day press
to save
additional days use
or
then press
to adjust
Notes:
� The days with
are the days the timer will water.
� To de-select a day press
until it is flashing then
press
.
4. SETTING THE START TIME
Press
to change to the next mode.
WATERING DAYS START TIME
CODE :
CYCLE
NEXT
START
TIME
A B C D
WATER
DAY
EVERY
DELAY
AM
PM
TODAY
SU
MO
TU
WE
TH
FR SA
MANUAL
RESET
'Start Time' is the time of day that the tap timer will
begin watering. You can set up to 4 cycles (start times).
� Press to set the first start time on cycle A.
Press
or
to adjust the time. Press
� Press
to set another start time and use
CYCLE
A B C D
to adjust the time.
CYCLE
A B C D
DELAY
HRS
DAY
MIN
to move
. To select
to save.
HRS
DAY
MIN
to save.
or
Need help?
Do you have a question about the WATERWHIZ 100 and is the answer not in the manual?
Questions and answers
Water leaking- Is there a replacement part i can get for the tap connector at the top of the water timer? (Water is leaking from the connection between the tap and the water timer connector) I tried to find a connector in Bunnings but **** not sure if they sell the right part. Please help! Thanks!