Table of Contents
Advertisement
Quick Links
HINT: As you approach the source of the
leak continue adjusting the wheel without
moving the sensor head to a uniform tick
sound until you locate the exact location of
the leak.
IMPORTANT:
When
replacing
gooseneck into the clip on the right side,
wrap the gooseneck in a wide circular
manner counter-clockwise around the back
of the instrument. Bending in the opposite
direction may cause damage over the life of
the product.
WARNINGS:
To
prevent
ignition
of
flammable
combustible atmospheres, disconnect power
before servicing.
Always change batteries in an environment
free of combustible gases.
This instrument should not be used as a
carbon monoxide investigative tool.
851 Transport Drive
Valparaiso, IN 46383-8432
the
Innovative Detection Solutions
MADE IN THE USA
WITH GLOBALLY SOURCED COMPONENTS
or
Distributed by:
Phone: 219 465 2700
Web:
www.gasleaksensors.com
Quick-Start Instructions
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
Advertisement
Table of Contents
Related Manuals for SENSIT Technologies HXG-2
Summary of Contents for SENSIT Technologies HXG-2
- Page 1 HINT: As you approach the source of the Quick-Start Instructions leak continue adjusting the wheel without moving the sensor head to a uniform tick sound until you locate the exact location of the leak. 851 Transport Drive Phone: 219 465 2700 Valparaiso, IN 46383-8432 Web: www.gasleaksensors.com...
- Page 2 10% LEL of IMPORTANT: CAREFULLY OBSERVE methane. Consult Sensit Technologies for POLARITY WHEN CHANGING BATTERIES. cross sensitivities. Instrument will not function with improperly installed batteries. 8. Once the environment is determined to be safe to work in, if the source of an odor 3.
Need help?
Do you have a question about the HXG-2 and is the answer not in the manual?
Questions and answers