3.5 Remote Controller
NUMBER
OSD ON/OFF
LEFT Direction Key
DOWN Direction Key
ESC
BACKUP
DISPLAY
SQEUENCE
PLAYBACK CONTROL
ALARM SETUP
※ How to set ID
① Before setup the ID, Enter to the GENERAL SETUP and set the ID first. (Default is 0)
② While pressing and holding the ID button, enter the unit address of the DVR by two-digit.
③ If the unit address is a single digit, enter two digit number by adding the number 0 as the first digit.
( Example – If the unit address is 1, the input value is 01.)
※ A single remote controller can change ID from 0 to 19 and independently control up to 20 DVRs.
ID
MUTE
UP Direction Key
RIGHT Direction Key
ENTER
MENU
SETUP
STATUS
FREEZE
ZOOM
PANIC RECORDING
SPOT SETUP
16
PTZ
PTZ