[SERVER2]
▪ DHCP : Select On/Off for dynamic IP.
▪ IP ADDRESS : Type IP address. (Available when DYNAMIC IP is OFF)
▪ NETMASK : Type Subnet mask. (Available when DYNAMIC IP is OFF)
[CLIENT]
▪ CLIENT ACCESS : Select client access options. ( ALL / RANGE )
▪ BEGIN ADDRESS / END ADDRESS (When select RANGE option, type the IP address to accept)
: Input the acceptable IP address.
▪ SMS / WEB PORT (TCP) : Select SMS / Web Port.
▪ REMOTE RESTART : Select On/Off to restart DVR at remote.
▪ REMOTE CONFIG : Select On/Off to change configuration.
48