Gazer CM70 Series User Manual page 21

• NAVI button is intended for fast switching to a navigation app set before. When held down, the navigation app will switch
to the app launched previously.
To set an application to be launched when NAVI button on the front panel is held down and when «Navigation» app icon is
tapped on the main home screen, the following should be done:
1.
Open «Settings» – «Navigation settings» – «Navigation application options»
2. Select the required app
3. Press «Back» or «Home» button
BAND button is intended to promptly switch to Radio app. In addition, this button is used to switch between the radio
•
station groups and frequency bands when the radio is on.
• button is intended to stop and play back tracks and other media files.
button is intended to promptly switch to Bluetooth app. An incoming call can also be answered using this button.
•
• TFT button or icon is intended to promptly switch off/on the display.
• Rotating PWR/VOL knob.
– By rotating the knob, you can change the current volume of the multimedia system. Pressing the switch will result in
fast muting (MUTE). If the regulator is held down, the multimedia system will switch to the standby mode.
• Rotating SEL/TUNE knob.
– Backward or Forward button functions will be enabled by rotating the switch. Pressing the rotating switch will open
the equalizer settings.
Front Panel Buttons
EN
21