Download  Print this page

1: Attaching The Table-top Stand - Sony BRAVIA XBR-55X855A Operating Instructions Manual

Hide thumbs


1: Attaching the Table-
Top Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
Place the TV set on the Table-Top Stand.
Arrow direction shows front of the Table-Top
Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
• If using an electric screwdriver, set the torque
at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top
Stand from the TV
To detach the Table-Top Stand from the TV,
remove the screws
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Be sure the TV is vertical before turning on. To
avoid uneven picture uniformity do not power on
the TV with the LCD panel facing down.
• When installing the TV on a wall, remove the
screws from the rear of the TV. Be sure to store
the removed screws in a safe place, keeping
them away from children.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed) to
the original holes on the rear of the TV.
fixed in step 2.


Table of Contents

   Related Manuals for Sony BRAVIA XBR-55X855A

Comments to this Manuals

Symbols: 0
Latest comments: