Sony XBR-55X805C Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. XBR-55X805C
  6. Service manual

Sony XBR-55X805C Service Manual

Gn1t chassis
Hide thumbs Also See for XBR-55X805C:
Table of Contents

Advertisement

Quick Links

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
SERVICE MANUAL
ORIGINAL MANUAL ISSUE DATE: 7/2015
Version
Date
1.0
7/2015
2.0
12/2015
Subject
Original manual issue.
Addition of information. (P.10, P.11, P.77, P.79, P.86)
Change of information. (P.3, P.9, P.12, P.39, P.43, P.66, P.131, P.138~P.141, P.147, P.148, P.152)
GN1T
CHASSIS
Segment: XFLL
LCD TV
9-888-581-02

Advertisement

Table of Contents
loading

Related Manuals for Sony XBR-55X805C

Summary of Contents for Sony XBR-55X805C

  • Page 1 HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL GN1T CHASSIS ORIGINAL MANUAL ISSUE DATE: 7/2015 Segment: XFLL Version Date Subject 7/2015 Original manual issue. 12/2015 Addition of information. (P.10, P.11, P.77, P.79, P.86) Change of information. (P.3, P.9, P.12, P.39, P.43, P.66, P.131, P.138~P.141, P.147, P.148, P.152) LCD TV 9-888-581-02...
  • Page 2 SERVICE MANUAL GN1T CHASSIS Segment: XFLL LCD TV 9-888-581-02...

  • Page 3: Model List

    MODEL LIST MODEL COLOR COMMANDER DEST. MODEL COLOR COMMANDER DEST. XBR-55X805C Black RMT-TX100B (LA8) CHILE PERU VENEZUELA (AR4) ARGENTINA XBR-55X807C Black RMT-TX100B (CO1) COLOMBIA XBR-55X809C Black RMT-TX100B (ECU) ECUADOR XBR-55X810C Black RMT-TX100U (UC2) US/CND XBR-65X800C Black RMT-TX100B (LA1) MEXICO XBR-65X805C...

  • Page 4: Warnings And Cautions

    Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.
  • Page 5 Les composants identifi es par une trame et par une marque du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel.

  • Page 6: Use Caution When Handling The Lcd Panel

    WARNINGS AND CAUTIONS USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. Do not press on the panel or frame edge to avoid the risk of electric shock.

  • Page 7: Safety Check-Out

    SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.
  • Page 8 SAFETY CHECK-OUT Leakage Test The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1.

  • Page 9: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 10 SELF DIAGNOSIS FUNCTION [SELF DIAGNOSTIC SCREEN DISPLAY] Error count Error item Naming Format of error timestamps SELF CHECK YYMMDDhhmmss (in UTC) Example: Back << 120823132523 -> Aug 23 2012 13:25:23 UTC MAIN_POWER 000000000000 000000000000 000000000000 * Only when time is set, an error timestamp is saved.

  • Page 11: Self-Diagnostic Screen Display

    SELF DIAGNOSIS FUNCTION SELF-DIAGNOSTIC SCREEN DISPLAY For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for confirmation on the screen: [To Bring Up Screen Test] In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen.

  • Page 12: Sec 1. Disassembly

    SEC 1. DISASSEMBLY • There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts. 1-1. XBR-55X805C/807C/809C/810C 1-1-1. STAND, SHAFT (L SWN) A AND NECK STAND, SHAFT 4 screws (SCREW, +PSW M5X12) P/N: 2-580-607-01...
  • Page 13 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-2. LABEL, REAR TERMINAL AND LABEL, SIDE TERMINAL (W) AND LABEL, CI (CO1 ONLY) LABEL, CI LABEL, REAR TERMINAL LABEL, SIDE TERMINAL (W) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 14 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-3. AC COVER AND POWER SUPPLY CORD Screw (SCREW, +PSW M4X10) P/N: 4-159-298-01 POWER SUPPLY CORD AC COVER XBR-55/65X800C,805C,807C,809C,810C...
  • Page 15 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-4. COVER, REAR (L SWN) A 7 screws (SCREW, +BVTP 4X12 TYPE2 IT-3) P/N: 2-580-639-01 6 screws (SCREW, +PSW M4X10) P/N: 4-159-298-01 10 screws (SCREW, +PWH M3X6) P/N: 4-452-935-11 NOTE: COVER, REAR (L SWN) A XBR-55/65X800C,805C,807C,809C,810C...
  • Page 16 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-5. TAPE TAPE (120 Hz) TAPE (60 Hz) TAPE TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 17 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-6. TAPE (120 Hz) TAPE (60 Hz) TAPE TAPE TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 18 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-7. TAPE AND WIRE DRESSING XBR-55/65X800C,805C,807C,809C,810C...
  • Page 19 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-8. WIRE DRESSING AND SPEAKER BOX ASSY (L) SPEAKER BOX ASSY (L) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 20 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-9. WIRE DRESSING AND SPEAKER BOX ASSY (R) SPEAKER BOX ASSY (R) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 21 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-10. TAPE TAPE TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 22 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-11. CONNECTOR ASSY 28P (120 Hz) CONNECTOR ASSY 28P P/N: 1-910-110-69 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 23 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-12. CONNECTOR ASSY 28P (60 Hz) CONNECTOR ASSY 28P P/N: 1-910-110-67 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 24 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-13. FLEXIBLE FLAT CABLE 41P (120 Hz ONLY) TAPE TAPE FLEXIBLE FLAT CABLE 41P P/N: 1-849-076-11 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 25 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-14. FLEXIBLE FLAT CABLE 51P (120 Hz) FLEXIBLE FLAT CABLE 51P P/N: 1-849-075-11 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 26 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-15. FLEXIBLE FLAT CABLE 51P (60 Hz) TAPE FLEXIBLE FLAT CABLE 51P P/N: 1-849-075-11 XBR-55/65X800C,805C,807C,809C,810C...

  • Page 27: Wire Dressing

    DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-16. WIRE DRESSING XBR-55/65X800C,805C,807C,809C,810C...
  • Page 28 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-17. SMART CORE SMART CORE NOTE: XBR-55/65X800C,805C,807C,809C,810C...

  • Page 29: Switch Unit

    DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-18. SWITCH UNIT SWITCH UNIT XBR-55/65X800C,805C,807C,809C,810C...
  • Page 30 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-19. HARNESS ASSY (MAIN) HARNESS ASSY(MAIN) P/N: 1-910-110-68 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 31 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-20. BT ANTENNA Screw (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 BT ANTENNA XBR-55/65X800C,805C,807C,809C,810C...
  • Page 32 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-21. BRACKET, SP L (L SWN) A AND BRACKET, SP R (L SWN) A 6 screws (SCREW, +PSW M3X8) 6 screws (SCREW, +PSW M3X8) P/N: 2-580-593-01 P/N: 2-580-593-01 BRACKET, SP L (L SWN) A BRACKET, SP R (L SWN) A...
  • Page 33 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-22. BRACKET, STAND (L SWN) BRACKET, STAND (L SWN) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 34 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-23. GL6 6 screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 35 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-24. SHEET, INSULATION(HRN L) SHEET, INSULATION(HRN L) NOTE: XBR-55/65X800C,805C,807C,809C,810C...
  • Page 36 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-25. BRACKET, SIDE F (MOLD) BRACKET, SIDE F (MOLD) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 37 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-26. BRACKET, TOP FL (MOLD) (CO1 ONLY) BRACKET, TOP FL (MOLD) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 38 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-27. BMFW 8 screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 BMFW XBR-55/65X800C,805C,807C,809C,810C...
  • Page 39 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-28. GASKET (BMF) BMFW B-Side view Five attachment positions of Gasket PWB P/N indication location NOTE: When you replace a BMFW board, it is necessary to stick five new GASKET on a new BMFW board. GASKET (BMF): 4-566-117-01 But in below cases, GASKET is not necessary.
  • Page 40 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-29. SHEET, THERMAL(BM) AND PLATE, MAIN S (HRN) NOTE: SHEET, THERMAL (BM) PLATE, MAIN S (HRN) 2 screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 41 DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-30. SLIDE, CLAMP SLIDE, CLAMP XBR-55/65X800C,805C,807C,809C,810C...

  • Page 42: Lcd Panel

    DISASSEMBLY 1-1. XBR-55X805C/807C/809C/810C 1-1-31. LCD PANEL LCD PANEL XBR-55/65X800C,805C,807C,809C,810C...
  • Page 43 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-1. STAND, SHAFT (2L SWN) A AND NECK STAND, 4 screws (SCREW, +PSW M5X12) P/N: 2-580-607-01 SHAFT (2L SWN) A 2 screws ( SCREW, +PSW M5X20) 2 screws ( SCREW, +PSW M5X20) NECK NECK STAND, SHAFT (2L SWN) A XBR-55/65X800C,805C,807C,809C,810C...
  • Page 44 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-2. LABEL, REAR TERMINAL AND LABEL, SIDE TERMINAL (W) AND LABEL, CI (CO1 ONLY) LABEL, CI LABEL, REAR TERMINAL LABEL, SIDE TERMINAL (W) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 45 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-3. AC COVER AND POWER SUPPLY CORD Screw (SCREW, +PSW M4X10) P/N: 4-159-298-01 POWER SUPPLY CORD AC COVER XBR-55/65X800C,805C,807C,809C,810C...
  • Page 46 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-4. COVER, REAR (2L SWN) A COVER, REAR (2L SWN) A 7 screws (SCREW, +BVTP 4X12 TYPE2 IT-3) P/N: 2-580-639-01 6 screws (SCREW, +PSW M4X10) P/N: 4-159-298-01 12 screws (SCREW, +PWH M3X6) P/N: 4-452-935-11 NOTE: XBR-55/65X800C,805C,807C,809C,810C...
  • Page 47 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-5. TAPE TAPE TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 48 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-6. TAPE AND WIRE DRESSING TAPE TAPE TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 49 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-7. TAPE TAPE TAPE TAPE (DK020FR-19) 19X50 SHEET TAPE XBR-55/65X800C,805C,807C,809C,810C...
  • Page 50 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-8. WIRE DRESSING XBR-55/65X800C,805C,807C,809C,810C...
  • Page 51 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-9. SPEAKER BOX ASSY (L) SPEAKER BOX ASSY (L) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 52 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-10. SPEAKER BOX ASSY (R) SPEAKER BOX ASSY (R) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 53 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-11. BT ANTENNA Screw (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 BT ANTENNA XBR-55/65X800C,805C,807C,809C,810C...
  • Page 54 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-12. SMART CORE SMART CORE NOTE: XBR-55/65X800C,805C,807C,809C,810C...
  • Page 55 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-13. SWITCH UNIT SWITCH UNIT XBR-55/65X800C,805C,807C,809C,810C...
  • Page 56 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-14. HARNESS ASSY (MAIN) AND CONNECTOR ASSY 28P HARNESS ASSY(MAIN) P/N: 1-910-110-66 CONNECTOR ASSY 28P P/N: 1-910-110-65 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 57 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-15. SLIDE, CLAMP SLIDE, CLAMP SLIDE, CLAMP SLIDE, CLAMP SLIDE, CLAMP XBR-55/65X800C,805C,807C,809C,810C...
  • Page 58 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-16. BRACKET, SP (2L SWN) A 4 screws (SCREW, +PSW M3X8) 4 screws (SCREW, +PSW M3X8) P/N: 2-580-593-01 P/N: 2-580-593-01 BRACKET, SP (2L SWN) A BRACKET, SP (2L SWN) A XBR-55/65X800C,805C,807C,809C,810C...
  • Page 59 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-17. BRACKET, STAND (2L SWN) PULLEY, STAND (HWI) x2 P/N: 4-534-964-01 BRACKET, STAND (2L SWN) 12 screws (SCREW, +PSW M3X8) P/N: 2-580-593-01 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 60 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-18. GL6 6 screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 61 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-19. SHEET, INSULATION(HRN L) SHEET, INSULATION (HRN L) NOTE: XBR-55/65X800C,805C,807C,809C,810C...
  • Page 62 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-20. TAPE AND FLEXIBLE FLAT CABLE 41P (XFF) AND FLEXIBLE FLAT CABLE 51P (XFF) TAPE FLEXIBLE FLAT CABLE 51P (XFF) P/N: 1-849-079-11 FLEXIBLE FLAT CABLE 41P (XFF) P/N: 1-849-078-11 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 63 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-21. BRACKET, SIDE F (MOLD) BRACKET, SIDE F (MOLD) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 64 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-22. BRACKET, TOP FL (MOLD) (CO1 ONLY) BRACKET, TOP FL (MOLD) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 65 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-23. BMFW 8 screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 BMFW XBR-55/65X800C,805C,807C,809C,810C...
  • Page 66 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-24. GASKET (BMF) BMFW B-Side view Five attachment positions of Gasket PWB P/N indication location NOTE: When you replace a BMFW board, it is necessary to stick five new GASKET on a new BMFW board. GASKET (BMF): 4-566-117-01 But in below cases, GASKET is not necessary.
  • Page 67 DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-25. SHEET, THERMAL(BM) AND PLATE, MAIN S (HRN) NOTE: SHEET, THERMAL (BM) PLATE, MAIN S (HRN) 2 screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 XBR-55/65X800C,805C,807C,809C,810C...

  • Page 68: Lcd Panel

    DISASSEMBLY 1-2. XBR-65X800C/805C/807C/809C/810C 1-2-26. LCD PANEL LCD PANEL NOTE: XBR-55/65X800C,805C,807C,809C,810C...
  • Page 69 DISASSEMBLY 1-3. SMART CORE 1-3-1. BRACKET, WIFI ASSY BRACKET, WIFI ASSY XBR-55/65X800C,805C,807C,809C,810C...
  • Page 70 DISASSEMBLY 1-3. SMART CORE 1-3-2. WLAN / BT MODULE(11AC) ASSY NOTE: WLAN / BT MODULE(11AC) ASSY XBR-55/65X800C,805C,807C,809C,810C...
  • Page 71 DISASSEMBLY 1-3. SMART CORE 1-3-3. SHEET, THERMAL (SC) AND WLAN / BT MODULE(11AC) WLAN / BT MODULE(11AC) SHEET, THERMAL (SC) Opposite side of WLAN / BT MODULE (11AC) ASSY 1-3-4. HEAT SINK (SC) AND BRACKET, WIFI HEAT SINK (SC) BRACKET, WIFI XBR-55/65X800C,805C,807C,809C,810C...
  • Page 72 DISASSEMBLY 1-3. SMART CORE 1-3-5. COVER, TOP NOTE: COVER, TOP XBR-55/65X800C,805C,807C,809C,810C...
  • Page 73 DISASSEMBLY 1-3. SMART CORE 1-3-6. PANEL, ORNAMENT PANEL, ORNAMENT XBR-55/65X800C,805C,807C,809C,810C...

  • Page 74: Light, Guide

    DISASSEMBLY 1-3. SMART CORE 1-3-7. LIGHT, GUIDE LIGHT, GUIDE LIGHT, GUIDE LOCK PORTION XBR-55/65X800C,805C,807C,809C,810C...
  • Page 75 DISASSEMBLY 1-3. SMART CORE 1-3-8. HSC3_L MOUNT NOTE: HSC3_L MOUNT XBR-55/65X800C,805C,807C,809C,810C...
  • Page 76 DISASSEMBLY 1-3. SMART CORE 1-3-9. CASE, BOTTOM (LL) CASE, BOTTOM (LL) XBR-55/65X800C,805C,807C,809C,810C...

  • Page 77: Sec 2. Adjustment

    SEC 2. ADJUSTMENT HOW TO ENTER THE SERVICE MODE 1) Turn on the main power switch to set in standby mode. 4) How to use the remote commander. 2) Press the buttons on the remote commander in the following sequence Function The flow of control with each interval within 1 sec, then the service mode will be set.

  • Page 78: Software Version

    ADJUSTMENT SOFTWARE VERSION 1) In Service Mode, select “Model Information”, press “Enter” or “→ ” button to enter Status Information. Main Micro Service Mode SW Version: Model PKG2.011.0010NAB NVM Version: 0001 UC2 Model Information >> Boot Version: V1.000 PQ Version: Self diagnosis History >>...

  • Page 79: Serial Number Edit

    ADJUSTMENT SERIAL NUMBER EDIT (1) Service Mode 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or Model Information >> Self diagnosis History >> “→” button to enter inside. Video / Audio >> Panel / PQ >>...
  • Page 80 ADJUSTMENT SERIAL NUMBER EDIT (2) Service Mode YES is selected, the input data is saved into EEPROM. SERIAL NUMBER EDIT is greyed out and the serial number that has been input is displayed. >> Status Information >> Model Information User will not able to edit anymore.

  • Page 81: Model Number Setting

    ADJUSTMENT MODEL NUMBER SETTING 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. 2) Select “Model Number Setting” by pressing “↑” or “↓” button then pressing “Enter” or “→” button. 3) Press “↑”...
  • Page 82 ADJUSTMENT WB ADJUSTMENT c. To change data , press “←” or “→” on remote commander. (Please apply when main board or panel is replaced.) In “Panel/PQ” service mode. a. Go to “WB Adjustment” category by “↑” or “↓”. Back << <[ ]>...
  • Page 83 ADJUSTMENT 2. In “WB/Mura/CUC data transfer”. WB/MURA/CUC DATA TRANSFER a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” on remote commander. (Please apply when main board or panel is replaced.) 1. In “Panel/PQ” service mode. b. To change the items, press “←” or “→” on remote commander and press “Enter” a.
  • Page 84 ADJUSTMENT HDD PERFORMANCE CHECK 3. A message "Please wait ..." is displayed during performance check processing. 1. In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. Service Mode Service Mode Please wait…...
  • Page 85 ADJUSTMENT HDD RE-REGISTRATION 1) In “Service Mode”, select “General Setting” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. 2) Select “AAA” by pressing “↑” or “↓” then pressing “Enter” or “→” button to enter inside. Service Mode General Setting Model Information...

  • Page 86: Sec 3. Trouble Shooting

    SEC 3. TROUBLE SHOOTING 3-1. TRIAGE Chart of triage information Confirm the claimed symptom. Select that symptom from the chart. Bring all the boards and cables listed for that symptom. Follow the troubleshooting charts in the technical guides to isolate the board. Chart Color Code.

  • Page 87: Troubleshooting

    TROUBLE SHOOTING 3-2. NO POWER 3-2-1. NO POWER-PCU No Power Check STBY 3.3V Replace C9030 Between G* Board to G* Board On B* board B* Board Harness Harness B* Board u-Com Failure DDCON/LDO Main Device Failure XBR-55/65X800C,805C,807C,809C,810C...
  • Page 88 TROUBLE SHOOTING 3-2-2. NO POWER-U-Com Failure (1/2) START Check MAIN_VCC R9175 Voltage. G-Board Check C9117 Voltage. Check +3.3V_STBY Is the voltage >1.6V? Is the voltage >3.0V? R9144, CN9000 #26pin Check P_ON_VBUS Check R9186 Voltage. Check DC_OFF_DET P-on ucom #pin11 Change IC9017 Is the voltage >3.0V? IC9018 is >3.0V?
  • Page 89 TROUBLE SHOOTING 3-2-2. NO POWER-U-Com Failure (2/2) From previous page Check P_ON_#2 P-on ucom #pin14 Change IC9017 Is the voltage >3.0V? Check ORESETB P-on ucom #pin12 Change IC9017 Is the voltage >3.0V? Check X_SYSTEM_RST P-on ucom #pin16 Change IC9017 Is the voltage >3.0V? If PANEL_PWER_ON (R9172) is 0V Check XRST Change IC9017...
  • Page 90 TROUBLE SHOOTING 3-2-3. NO POWER: DC_OFF_DET check 3-2-4. NO POWER: DDCONs check START START Check fuse F9xxx Change Fuse Check Vdd Is fuse OK? C9118 Change IC9018 Is voltage >5V? Check Vcc voltage Check POWER_ON P-on ucom #pin19 C9xxx (Refer to No Power U-Com Failure) Is voltage >12.0V? Check Enable pin voltage...
  • Page 91 TROUBLE SHOOTING 3-2-5. NO POWER: DDCON check START Check IC9403 Vcc voltage Check Vcc voltage Check C9428 C9061 D9000 Change D9000 Is voltage >3V? Is diode ? Is voltage >12V? Check G board and harness Check Vcc voltage Check Change D9001 C9061 D9001 Is voltage >4V?
  • Page 92 TROUBLE SHOOTING 3-2-6. NO POWER: LDOs check check START Check Vcc voltage C9xxx Check +3.3V_MAIN DDCON (IC9003) Is voltage >3V? Check Enable pin 1.2 No Power U-Com Failure voltage Is voltage >3V? Change LDO IC XBR-55/65X800C,805C,807C,809C,810C...

  • Page 93: Standby Led Blinking

    TROUBLE SHOOTING 3-3. STANDBY LED BLINKING 3-3-1. 2 Times Blinking (Main power Error) 3-3-2. 3 Times Blinking (DC Alert) BMFL/BMFW board 2-time blinking 3-time blinking Check +12V_REG DC_ALERT at pin 13/15/17 of CN9000 G* Board on B* Board, Check +5.0V_MAIN IC9014,etc Voltage >...
  • Page 94 TROUBLE SHOOTING 3-3-3. 3 Times Blinking (Audio Error) LED 3x blinking Segment “XS”? See other flow Audio Error ? Replace B-K Harness B-K harness NG OK ? Go to page Replace K-PWB Power Off Checking*1 K-PWB NG OK ? Go to page Power off Checking*2 Replace B-PWB B-PWB NG...
  • Page 95 TROUBLE SHOOTING Note 1: Note 2: (1) PVDD-GND short check (1) PVDD-GND short check 1) Power Off Checking*1 Measure impedance between PVDD and GND at C7706, Measure impedance between PVDD and GND at C7722, C7762, C7782, C7707. C7834. If impedance is <100Ω → NG If impedance is <100Ω...
  • Page 96 TROUBLE SHOOTING 2) Power Off Checking*2 (4) 12.5V check BMFL / BMFW Measure voltage between PVDD and GND at capacitor C7706 or C7707.(See 3.3) Power Off Check*2 Voltage rise more than 0V for a moment at power on → Yes Segment “XS”? (5) 12.5V check KS-PWB (XS) Measure voltage between PVDD and GND at...
  • Page 97 TROUBLE SHOOTING 3) Power Off Checking*3 No Sound Without LED 3x No sound only Go to Analog RF and Digital RF ? No Sound Tuner Select [External Inputs]→ AV receiver is connected [BRAVIA Sync Settings]→ to HDMI in ? [BRAVIA Sync Control]→[off] Go to No sound only HDMI ? No Sound HDMI...
  • Page 98 TROUBLE SHOOTING 3-3-4. 3 Times Blinking (HDMI EQ Error) This 3 times blinking function for HDMI EQ BMFL/BMFW board error has been disabled for the SW later than PKG2173. So, for the above applicable models, you can 3-time blinking Check Ignore this flow.
  • Page 99 TROUBLE SHOOTING 3-3-5. 4 Times Blinking (LED Voltage Error) 4-time blinking Between 0.898V to 2.997V LED driver or G* board Check R9027  Change LD board or G* board. on the B* Board 0.897V or less B* Board XBR-55/65X800C,805C,807C,809C,810C...
  • Page 100 TROUBLE SHOOTING 3-3-6. 5 Times Blinking (Panel Communication Error) 5-times blinking Change Change B-Board Panel (T-con) Check “+12.5V_TCON” at G-Board is Replace G-Board CN9000 suspicious Symptom Symptom on the B-Board improvement improvement B-Board is Panel (T-Con) is suspicious suspicious Symptom Replace the Harness improve Harness is...
  • Page 101 TROUBLE SHOOTING 3-3-7. 6 Times Blinking (Backlight Error) 6-times blinking Check a voltage of Harness / BL_ERR_DET. Check Connection Voltage ≥ 1.9 V Check point is harness/connection Change Symptom broken JL9007 G*board to B*Board Harness harness Improvement 23pin of CN9000 LD board to B*Board No improvement on B*Board...
  • Page 102 TROUBLE SHOOTING 3-3-8. 7 Times Blinking (Temperature Error) 7-time blinking Setting circumstance is OK? Set to another Temperature, location, etc. Ventilation, etc. Change B* Board, and Aging a few Panel hours Symptom improvement Check I2C_C bus Temp sensor B* Board NG communication OK? IC1400 (check the next page)
  • Page 103 TROUBLE SHOOTING 3-4. NO SOUND 3-4-1. No Sound Audio 3-4-2. No Sound : TUNER No Sound with normal picture No Sound Audio Segment “XS”? Only RF tuner input? Replace B-K Harness Please refer Audio Check IC1000 (SOC) OK ? troubleshooting Replace K-PWB OK ? Replace B-PWB...
  • Page 104 TROUBLE SHOOTING 3-4-3. No Sound : MHL No Sound Check the picture Refer to MHL NO PICTURE Check Sound by other TV set Refer to No Sound Audio which is same model Check Source equipment by Reference TV set Change B-Board. (For example, Samsung TV(UN46ES7000), Toshiba TV(42WL863), RB1 or RB2) Check the settings of...
  • Page 105 TROUBLE SHOOTING 3-4-4. No Sound : HDMI1/2/3/4 No Sound Check the picture Refer to HDMI (1/2/3/4) NO PICTURE Does this model have Connect Stereo minijack cable between Source and the TV, and Check the mode Analog Audio In Change “HDMI/DVI Audio Source” to Auto or Analog Audio In. of Source equipment (Stereo minijack)? HDMI...
  • Page 106 TROUBLE SHOOTING 3-5. NO PICUTURE BL_ON (L or H): IC9017 #18pin (for 4K BMFW/BMFL board) No Picture BL_ON：H Check Smart Core Check Replace Got Any Normal Replace LCD Panel Behavior BL_ON the V by One FFC Display? the main Board (T-CON) (5x Blinking) on the main board...
  • Page 107 TROUBLE SHOOTING 3-5-1. No Picture AEP Destination (BMFL/BMFW) SCART No Picture AEP SCART CVBS SCART RGB No Picture No Picture [LOW: 0V] [LOW: 0V] Check SCART_FB Check SCART_FB Detailed check all parts Check CN7501 Check CN7501 IC1000 L37 IC1000 L37 at SCART_FB signal Connection Connection...
  • Page 108 TROUBLE SHOOTING 3-5-2. No Picture AEP Destination (BMFL/BMFW) VIDEO No Picture AEP Video 2 Component No Picture No Picture Check J7504 Con Check J7504 NG (Vpp: 0 V) Check if input OSD Check if input OSD NG (Vpp: 0 V) VIDEO_DET at Connection, is GREY OUT...
  • Page 109 TROUBLE SHOOTING 3-5-3. No Picture CH/MX/PA/COL/LA (BMFL/BMFW) No Picture Video Video 2 Video 1 No Picture No Picture Check J7505 Check J7504 NG (Vpp: 0 V) Check if input OSD NG (Vpp: 0 V) Check if input OSD Connection, Connection, is GREY OUT is GREY OUT VIDEO2_DET...
  • Page 110 TROUBLE SHOOTING 3-5-4. No Picture CH/MX/PA2/NZ/AUS/BR/COL/BR/UC/HK/TW (BMX) No Picture Video Component No Picture Check if input OSD Check J7504 Con NG (Vpp: 0 V) is GREY OUT VIDEO_DET at R7539, OK if it is highlighted CR_DET at R7538 OK (Vpp: 3.3 V) Detailed check all parts NG (Vpp: 0 V) at VIDEO_DET signal...
  • Page 111 TROUBLE SHOOTING 3-5-5. No Picture J/UC/HK/TW Destination (BMFL/BMFW) No Picture Video1 Video2 No Picture No Picture Check J7501 Check J7504 Check if input OSD Check if input OSD NG (Vpp: 0 V) NG (Vpp: 0 V) Connection, Connection, is GREY OUT is GREY OUT VIDEO2_DET VIDEO_DET...
  • Page 112 TROUBLE SHOOTING 3-5-6. No Picture J/UC/HK/TW Destination (BMFL/BMFW) No Picture Component No Picture Check if input OSD Check J7504 Con NG (Vpp: 0 V) is GREY OUT VIDEO_DET at R7539, OK if it is highlighted CR_DET at R7538 OK (Vpp: 3.3 V) Detailed check all parts NG (Vpp: 0 V) at VIDEO_DET signal...
  • Page 113 TROUBLE SHOOTING 3-5-7. No Picture : @ Tuner Notes: I2C line for all tuners except Japan_SKP - Parts for I2C_A_SDA line: R6001, C6004. RF input no picture / noisy picture - Parts for I2C_A_SCL line: R6002, C6005. I2C line for Japan_SKP - Parts for I2C_D_SDA line: R6003,C6006 Check RF source cable Change RF cable and antenna...
  • Page 114 TROUBLE SHOOTING 3-5-8. FOR 12V LNB Voltage Checking: @ AEP_W and JP_SKP 12V LNB Voltage Checking MOSFET Q9019 Check Tuner power line Check P_ON_LNB signal line Check fuse F6000 broken 12V at JL9012 = 12V? at R9167 = 3.3V? Please refer DDCON Change the fuse troubleshooting Check harness between...
  • Page 115 TROUBLE SHOOTING 3-5-9. FOR ANALOG TUNING: @ All destination except JP Notes: - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301. - Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, R6300. For LA-ISDB(BR/AR), LA-T2(COL) and TW only - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, Analog Tuning R6303.
  • Page 116 TROUBLE SHOOTING 3-5-10. FOR DIGITAL TUNING 1: @ TW, NA-ATSC(MX/UC), JP_SKP and LA-T2(COL) Notes: - Parts for IFOUT_N line: R6007, FB6002, C6008, R6327, C6301, R6301. - Parts for IFOUT_P line: R6008, FB6003, C6009, R6326, C6300, Digital Tuning 1 R6300. - Parts for IFAGC line: R6072, R6009, R6010, R6069, C6302, For TW only R6303.
  • Page 117 TROUBLE SHOOTING 3-5-11. FOR DIGITAL TUNING 2: @ AEP_W, JP_SKP, PA_T2, CH/HK, LA-ISDB(BR/AR) and LA-T2(COL) Digital Tuning 2 For LA-ISDB(BR) and LA-T2(COL) only For JP_SKP For AEP-W For PA_T2 and CH/HK only Confirm ANT or Cable connection Confirm ANT or Satellite connection Confirm ANT or Satellite connection All except SKP_Opticast Terrestrial...
  • Page 118 TROUBLE SHOOTING 3-5-12. NO PICTURE: HDMI1 No Picture If you can do Check the below point at All lines component repair Connector side Other Input is OK are NG ・Check +5V line Check other Replace Change B-Board. ・Check HPD line HDMI input CN5202 ・Check DDC lines...
  • Page 119 TROUBLE SHOOTING 3-5-13. NO PICTURE: HDMI2 No Picture If you can do Check the below point at component repair All lines Connector side Other Input is OK are NG ・Check +5V line Replace Check other Change B-Board. ・Check HPD line HDMI input CN5202 ・Check DDC lines...
  • Page 120 TROUBLE SHOOTING 3-5-14. NO PICTURE: HDMI3 No Picture Check the below point at If you can do All lines Connector side component repair are NG Other Input is OK ・Check +5V line Check other Replace Change B-Board. ・Check HPD line HDMI input CN5203 ・Check DDC lines...
  • Page 121 TROUBLE SHOOTING 3-5-15. NO PICTURE: HDMI4 No Picture If you can do Check the below point at component repair All lines Connector side Other Input is OK are NG ・Check +5V line Check other Replace Change B-Board. ・Check HPD line HDMI input CN5208 ・Check DDC lines...
  • Page 122 TROUBLE SHOOTING 3-5-16. NO PICTURE: MHL (BMX) No Picture Check voltage at CD_SENSE_0, High NG (No communications) R5509 Check HDMI_0_HPD_CBUS Replace IC5212(HDMI EQ). Spec:High:2.0~5.3V at connector side Low:0.8~2.0V NG (No communications) Check TMDS(D0+/D0-) lines at connector side Replace RB5211 Low (< 2V) Check DDCCLK, Check RB5219 (47k ) Check Source equipment...
  • Page 123 TROUBLE SHOOTING 3-5-17. NO CHARGE: MHL (BMX) No Charge STBY “MHL Charge During STBY” Change “MHL Charge During STBY” (UI) to “On” The TV Power Status? (UI) Status? TV On CN5202 #18 pin Change MHL Cable High Check voltage at Check IC5208 #6 Check IC5208 #3 CD_SENSE_0,...

  • Page 124: Side Buttons Malfunction

    TROUBLE SHOOTING 3-6. SIDE BUTTONS MALFUNCTION Side Key button Change Switch Unit Switch unit issue malfunction Harness Harness on Switch Unit connection and B* Board properly connected issue Change Harness issue Switch unit-B* board Harness Power Key (B*Board) Key AD(B*Board) Check parts value : Check parts value : Parts Broken issue...

  • Page 125: Ir Remote Commander Malfunction

    TROUBLE SHOOTING 3-7. IR REMOTE COMMANDER MALFUNCTION Check whether center Center white LED Remote control battery IR do not response to white LED blink ,when using could be weak. lit up when remote Remote Commander commander near the sensor Change battery. control is pressed windows Harness...

  • Page 126: Light Sensor Error

    TROUBLE SHOOTING 3-8. LIGHT SENSOR ERROR Backlight doesn’t change Check UI setting for light User did not activate light Change the UI setting when ambient lighting Sensor. Make sure it is “on” to “ON” sensor function level changed Harness connection Harness on H-board and issue B* Board properly connected...
  • Page 127 TROUBLE SHOOTING 3-9. NETWORK MALFUNCTION 1) Ethernet (Wired) [Network Set-up] >[Wired Set-up] on the TV Connection Results Connection Results Connection Results B board Cable Connection Local Access Internet Access Failed Failed Failed Auto Check Proxy setting Wired Set-up Check cable B board Local router IP address setting...
  • Page 128 TROUBLE SHOOTING 2) Internal Wireless Network malfunction Wireless Network on the TV Error Message appear Is the radio field when the Wireless Strength too weak Bxx Board Network is selected? or even No signal? Change WiFi module Access Point From previous page WiFi module Check harness connection is OK...
  • Page 129 TROUBLE SHOOTING 3) Bluetooth malfunction Touch pad Remote doesn’t work 3D-glasses (Active) doesn’t work Bluetooth Speaker/Headphone/Headset doesn’t work Please refer Touch pad Remote manual Home > Settings > Check BT antenna 3D-glasses (Active) manual Bluetooth Settings Connection is OK Can read Near discoverable Bluetooth Speaker/Headphone/Headset operation manual Bluetooth Device...

  • Page 130: Sec 4. Diagrams

    SEC 4. DIAGRAMS 4-1. BLOCK DIAGRAM 4-1-1. UC2 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 131 DIAGRAMS 4-1-2. LA8/AR4/ECU XBR-55/65X800C,805C,807C,809C,810C...
  • Page 132 DIAGRAMS 4-1-3. CO1 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 133 DIAGRAMS 4-1-4. LA1 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 134 DIAGRAMS 4-2. CONNECTOR DIAGRAM XBR-55X805C, 807C, 809C, 810C XBR-55/65X800C,805C,807C,809C,810C...
  • Page 135 DIAGRAMS XBR-65X800C, 805C, 807C, 809C, 810C XBR-55/65X800C,805C,807C,809C,810C...
  • Page 136 DIAGRAMS 4-3. PC BOARD DIAGRAM BMFW (A SIDE) TP3109 cam013 cam9 cam5 C7746 C7747 C7748 C7749 CN7706 cam011 CN3601 CN3600 CN8301 CN1000 C3152 cam804 Q9027 CN7704 CN7705 CN7700 CN9000 cam025 IC3103 cam39 cam097 cam904 CL3627 CL3625 CL3623 CL3621 CL3620 CL3618 CL3617 CL3616 CL3615...
  • Page 137 DIAGRAMS BMFW (B SIDE) KJ004 KJ003 cam007 cam008 CM7704 JL6029 JL8002 JL5208 JL6005 JL8007 JL8005 JL8006 JL8008 JL6008 JL8024 IRM004 KB002 JL5209 ET006 JL6007 JL8003 JL8004 JL5206 JL8011 JL8000 JL8009 JL8010 JL5205 ET6000 ET6001 JL5204 JL5202 JL6009 JL5201 JL5203 C5383 JL6030 JL6010 JL6011...

  • Page 138: Circuit Boards Location

    DIAGRAMS 4-4. CIRCUIT BOARDS LOCATION XBR-65X800C/805C/807C/809C/810C XBR-55X805C/807C/809C/810C SWITCH UNIT BMFW BMFW SWITCH UNIT SMART CORE SMART CORE SMART CORE HSC3_L WLAN/BT MODULE XBR-55/65X800C,805C,807C,809C,810C...

  • Page 139: Sec 5. Exploded Views

    • The construction parts of an assembled part are indicated with a collation number in the remark column. • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 5-1. XBR-55X805C/807C/809C/810C REF. No. PART No.

  • Page 140: Exploded Views

    EXPLODED VIEWS 5-1-2. LCD PANEL REF. No. PART No. DESCRIPTION MARK 1-798-510-31 SWITCH UNIT (SM-G-WW) 4-546-444-31 BRACKET, SIDE F (MOLD) 4-546-444-61 BRACKET, SIDE F (MOLD) LA8/ CO1/ ECU/ A-2072-554-C COMPLE SVC (XF) BMFW CO1 A-2072-555-C COMPLE SVC (XF) BMFW UC2 A-2084-108-A COMPLE SVC (XF) BMFW BRB LA8/ ECU/ AR4...
  • Page 141 EXPLODED VIEWS 5-1-3. CONNECTORS REF. No. PART No. DESCRIPTION MARK 1-849-075-11 FLEXIBLE FLAT CABLE 51P CN3601(BMFW)-TCON (1) 1-849-076-11 FLEXIBLE FLAT CABLE 41P CN3600(BMFW)-TCON (1) 1-910-110-69 CONNECTOR ASSY 28P CN6401(GL6)-CN9000(BMFW)-TCON (1) 1-910-110-68 HARNESS ASSY(MAIN) CN1000(BMFW)-CN101(HSC3)-WIFI-SM/CN7700(BMFW)-SP (1) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 142 EXPLODED VIEWS 5-1-4. SCREWS REF. DESCRIPTION PART No. SCREW, +BVTP 4X12 TYPE2 IT-3 2-580-639-01 SCREW, +PSW M4X10 4-159-298-01 SCREW (+PSW) (M3X6) 2-990-421-41 SCREW , +PWH M3X6 4-452-935-11 SCREW, +PSW M3X6 W12 4-256-393-12 SCREW, +PSW M3X8 2-580-593-01 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 143 EXPLODED VIEWS 5-2. XBR-65X800C/805C/807C/809C/810C 5-2-1. REAR COVER REF. No. PART No. DESCRIPTION MARK 4-569-942-02 COVER, REAR (2L SWN) A 4-569-942-12 COVER, REAR (2L SWN) A UC2/ LA8/ LA1 4-563-755-01 LABEL, SIDE TERMINAL (W) 4-563-755-11 LABEL, SIDE TERMINAL (W) 4-563-755-21 LABEL, SIDE TERMINAL (W) LA8/ CO1 4-563-764-01 LABEL, REAR TERMINAL...
  • Page 144 EXPLODED VIEWS 5-2-2. LCD PANEL REF. No. PART No. DESCRIPTION MARK 1-798-510-31 SWITCH UNIT (SM-G-WW) 4-546-444-11 BRACKET, SIDE F (MOLD) 4-546-444-31 BRACKET, SIDE F (MOLD) 4-546-444-61 BRACKET, SIDE F (MOLD) LA8/ CO1 A-2072-556-C COMPLE SVC (XF) BMFW LA1 4-570-849-01 BRACKET, SP (2L SWN) A 1-474-633-11 GL6(CH)-STATIC CONVERTER(TV) 4-565-059-11...
  • Page 145 EXPLODED VIEWS 5-2-3. CONNECTORS REF. No. PART No. DESCRIPTION MARK 1-849-078-11 FLEXIBLE FLAT CABLE 41P (XFF) CN3600(BMFW)-TCON (1) 1-849-079-11 FLEXIBLE FLAT CABLE 51P (XFF) CN3601(BMFW)-TCON (1) 1-910-110-65 CONNECTOR ASSY 28P CN6401(GL6)-CN9000(BMFW)-TCON (1) 1-910-110-66 HARNESS ASSY(MAIN) CN1000(BMFW)-CN101(HSC3)-WIFI-SM/CN7700(BMFW)-SP (1) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 146 EXPLODED VIEWS 5-2-4. SCREWS REF. DESCRIPTION PART No. SCREW, +BVTP 4X12 TYPE2 IT-3 2-580-639-01 SCREW, +PSW M4X10 4-159-298-01 SCREW (+PSW) (M3X6) 2-990-421-41 SCREW , +PWH M3X6 4-452-935-11 SCREW, +PSW M3X6 W12 4-256-393-12 SCREW, +PSW M3X8 2-580-593-01 XBR-55/65X800C,805C,807C,809C,810C...
  • Page 147 EXPLODED VIEWS 5-3. SMART CORE (LL, C) REF. No. PART No. DESCRIPTION MARK 4-567-752-01 CASE, BOTTOM (LL) A-2066-086-A HSC3_L MOUNT EXCEPT ECU A-2088-030-A HSC3_L MOUNT KIT 4-564-313-01 LIGHT, GUIDE 4-564-312-01 PANEL, ORNAMENT 4-564-317-01 COVER, TOP 4-564-318-02 BRACKET, WIFI 4-547-207-01 HEAT SINK(SC) 1-458-853-11 WLAN/BT MODULE(11AC) XBR-55/65X800C,805C,807C,809C,810C...
  • Page 148 EXPLODED VIEWS 5-4. OTHER PART 5-4-1. MISCELLANEOUS 5-4-2. ACCESSORIES PART No. DESCRIPTION MARK PART No. DESCRIPTION MARK 3-876-036-71 UNI-LABEL, BLANK 1-492-975-21 REMOTE COMMANDER (RMT-TX100B) LA8/ CO1/ ECU/ AR4 1-492-978-21 REMOTE COMMANDER (RMT-TX100U) 4-262-708-04 CLAMPER, CABLE 1-848-803-11 RCA CONVERSION CABLE EXCEPT UC2 4-534-964-01 PULLEY, STAND (HWI) 65"...
  • Page 149 English 2015GL08-Data Made in Japan 9-888-581-02 © 2015. 7 Sony Visual Products Inc. XBR-55/65X800C,805C,807C,809C,810C...
  • Page 150 APPENDIX-1 How to USB update 1:Download USB image and unzip file. 2: copy unzip file to USB memory root folder. 3: USB memory insert TV. 4:USB image is not newer soft version. 4:USB image is newer soft version. Automatically show message and start update. Automatically show message and start update.
  • Page 151 APPENDIX-1 Software update for B board replacement Check the leftmost bit B board replacement “0” of NVM version by Service mode to confirm RCD version. Is it except 0 or 0? <Case1> After AC Plug-in, wait for Except “0” Panel : No Picture Check the software 30sec then turn on TV by SMART CORE LED : Red LED 3x blinking...
  • Page 152 APPENDIX-1 Software update for Panel/T-CON replacement Check the software version by Service Panel/T-CON replacement Model Number setting mode. Is it latest version? Update to the latest After AC Plug-in, wait for 30sec software version then turn on TV by power key *Remove all signal on TV or remote commander.
  • Page 153 APPENDIX-2 Wire Dressing (XBR-55X805C, 807C, 809C, 810C) Slide Clamp x1 VA Tape • Hold wires ・Fix wire Harness Tie • Fix wire XBR-55/65X800C,805C,807C,809C,810C...
  • Page 154 APPENDIX-2 Wire Dressing (XBR-65X800C, 805C, 807C, 809C, 810C) VA Tape Slide Clamp x3 • Hold wires ・Fix wire Harness Tie • Fix wire XBR-55/65X800C,805C,807C,809C,810C...
  • Page 155 APPENDIX-3 Caution for Panel handling Don’t grab plastic bezel only. Don’t push screen. Risk of bezel broken. Risk of screen broken. XBR-55/65X800C,805C,807C,809C,810C...

This manual is also suitable for:

Xbr-55x807cXbr-55x809cXbr-55x810cXbr-65x800cXbr-65x805cXbr-65x807c ... Show all

Table of Contents