Snmp Agent; Web Server; Ssh Server; Telnet Server - Ubiquiti AirFiber 11FX User Manual

Chapter 7: Services Tab

SNMP Agent

Simple Network Monitor Protocol (SNMP) is an application
layer protocol that facilitates the exchange of management
information between network devices. Network
administrators use SNMP to monitor network‑attached
devices for issues that warrant attention.
The airFiber X radio contains an SNMP Agent, which does
the following:
• Provides an interface for device monitoring using SNMP
• Communicates with SNMP management applications
for network provisioning
• Allows network administrators to monitor network
performance and troubleshoot network problems
For the purpose of equipment identification, configure the
SNMP Agent with contact and location information:
SNMP Agent Enables the SNMP Agent.
• SNMP Community Specify the SNMP community
string. It is required to authenticate access to
Management Information Base (MIB) objects and
functions as an embedded password. The airFiber X
radio also supports a read‑only community string;
authorized management stations have read access to
all the objects in the MIB except the community strings,
but do not have write access. The airFiber X radio
supports SNMP v1. The default SNMP Community is
public.
• Contact Specify the contact who should be notified in
case of emergency.
• Location Specify the airFiber X radio's physical location.

Web Server

The following Web Server parameters can be set:
Secure Connection (HTTPS)
uses secure HTTPS mode.
• Secure Server Port If secure HTTPS mode is used,
specify the TCP/IP port of the Web Server.
Server Port If HTTP mode is used, specify the TCP/IP port
of the Web Server.
Session Timeout
Specifies the maximum timeout before
the session expires. Once a session expires, you must log
in again using the username and password.
30
If enabled, the Web Server

SSH Server

The following SSH Server parameters can be set:
SSH Server This option enables SSH access to the
airFiber X radio.
• Server Port Specify the TCP/IP port of the SSH Server.
• Password Authentication
authenticate using administrator credentials to grant
SSH access to the airFiber X radio; otherwise, an
authorized key is required.
• Authorized Keys Click Edit to import a public key file
for SSH access to the airFiber X radio instead of using an
admin password.
‑ Import Public Key File
to locate the new key file. Select the file and click
Open to import the file for SSH access.
‑ Enabled Enables the specific key. All added keys are
saved in the system configuration file; however, only
the enabled keys are active on the airFiber X radio.
‑ Type Displays the type of key.
‑ Key Displays the key.
‑ Comment You can enter a brief description of the key.
Action
‑ You have the following options:
• Add Adds a public key file.
• Edit Make changes to a public key file. Click Save to
save your changes.
Del
• Deletes a public key file.
‑ Save Saves your changes.
‑ Close Discards your changes.

Telnet Server

The following Telnet Server parameters can be set:
Telnet Server This option activates Telnet access to the
airFiber X radio.
• Server Port Specify the TCP/IP port of the Telnet Server.
airFiber AF-11FX User Guide
If enabled, you must
Click Import Public Key File
Ubiquiti Networks, Inc.