Maintenance - Makita 3706 Instruction Manual

1
4
5
2
3
1. Circular guide
2. Thumb screw
3. Vacuum cover
4. Loosen
5. Tighten
1. Vacuum cover
2. Hose 28
3. Hose for vacuum cleaner
1
2
3
1. Vacuum cover
2. Hose 28
3. Dust collector

MAINTENANCE

To adjust the cutting depth, proceed first by loosening the thumb screw and
001638
then by sliding the vacuum cover and circular guide together. After completion
of the adjustment, tighten the thumb screw securely.
Connecting to Makita vacuum cleaner or dust collector
001639
1
Connect the hose of a vacuum cleaner/dust collector to the dust nozzle. When
connecting to Makita vacuum cleaner, an optional hose 28 mm in inner diame-
ter is necessary.
2
3
When connecting to Makita dust collector, connect the hose for the dust col-
001640
lector directly to the dust nozzle.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspec-
tion and replacement, any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always using Makita
replacement parts.
9