Whittier Wood 1610 Assembly Instructions

Whittier Wood 1610 Assembly Instructions

Center wall unit. finished program

Advertisement

Center Wall Unit
Finished Program
Model #
1610
Center Wall Unit
Thank you for allowing us to help you furnish your home.
We are certain you will be delighted with your new furniture
for many years to come.
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
P.O. Box 2827
Eugene, OR 97402 USA
1611a
Center Wall Unit
with doors
CUSTOMER SERVICE
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Fax: 541-687-2060• Email: info@whittierwood.com

IMPORTANT NOTES:

• This assembly requires two people.
• For normal household use only. Not recommended for commercial use.
• Do not climb, sit or stand on this piece of furniture.
• Unload items before you move this unit.
• Do not overload the shelves on this unit.
• Before loading or moving this unit, check all screws and supports for
tightness.
• For maximum stability, attach unit to the wall using the enclosed
hardware as per instructions.
• Before you begin your project, completely read the Assembly
Instructions.
• Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Production Code:

WARNING

4/17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1610 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood 1610

  • Page 1 If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.
  • Page 2: Parts List

    1610 Center Wall Unit & 1611a Center Wall Unit with doors Parts List Before you begin to assemble this unit, identify each part and make sure the quantities received match what is on this list. If you need to replace a part, please refer to the following list for the finish, part name and letter code.
  • Page 3 1610 Center Wall Unit & 1611a Center Wall Unit with doors Assembly Instructions Tools Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer To move the adjustable shelves: Determine where you want to place the Adjustable Shelves (B). Remove the #6 x 1/2" Undercut Screws (E) from the underside of the shelf and take out the Shelf and Shelf Brackets (D).
  • Page 4 Before you begin this assembly, identify each part and make sure the quantities received match what is on this list. If you need to replace a part, contact Whittier Wood Furniture customer service and refer to the following list for its name and letter code.
  • Page 5 1610 Center Wall Unit & 1611a Center Wall Unit with doors Assembly Instructions Decide where you want to place the bookcase in your room. Mark the baseboard with a pencil mark directly behind the location where the tipping restraint is attached to your item. Move the item away from the wall far enough to allow you to access the spot where the baseboard meets the floor.

This manual is also suitable for:

1611a

Table of Contents