Table of Contents
Advertisement
Quick Links
Model #
1448AFGSPa; 1448AFCAFa
Pacific Queen Storage Bed
AFGSP = Glazed Spice finish
AFCAF = Caffè finish
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store.
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended to
use this unit in a commercial setting.
Unload items before you move this unit.
Do not overload the drawers.
Before you load or move this unit, tighten all screws
and supports.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
This assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
Production Code:
VN
04/13
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Whittier Wood Pacific 1448AFGSPa
Summary of Contents for Whittier Wood Pacific 1448AFGSPa
- Page 1 To Order: Provide the finish and furniture model number missing or damaged during assembly. For a replacement (upper portion of this page), the part letter, production part, contact Whittier Wood Products customer service code, quantity needed, reason for replacement and your department by phone, fax, mail or email.
- Page 2 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. 1451AFGSPa; 1451AFCAFa Headboard/Footboard Kit (x1) Part Description Quantity...
- Page 3 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Parts List 1449AFGSP; 1449AFCAF Pedestal Kit (x2) Part Description Quantity Pedestal Kit Drawer Box (inserted) Drawer Face (attached) Drawer Slides (pre-installed sets) T-Nut (inserted) #7 x 1-1/2" Black Pan Head Screw (inserted) #8 x 1" Lo-Profile Screw (inserted) #6 x 1-1/4"...
- Page 4 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Assembly Instructions This assembly requires two people. Tools Required: Hex Wrench (provided), Phillips Screwdriver, Slotted Screwdriver, 1/2" Wrench, 7/16" Wrench, Tape Measure, Rubber Mallet or Padded Hammer, Wood Glue Remove the Drawers (O) from the Pedestal Kits (N). To remove the drawers, pull up on the left Drawer Release Lever while pushing down on the right Drawer Release Lever.
- Page 5 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Assembly Instructions This assembly requires two people. Rotate the Adjustable Glides with Hex Nut (ZF) so that the Assembled Feet (ZG) are 4-1/2" tall as shown in Figure 3a. Attach the six Assembled Feet (ZG) as shown in Figure 3. 4-1/2"...
- Page 6 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Assembly Instructions This assembly requires two people. Spread a thin film of glue in the dowel holes at one end of the top cap of the bed. Insert two dowels (J) and gently tap with a rubber mallet. Quickly wipe away any excess glue. See Figures 5 and 5a.
- Page 7 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Assembly Instructions This assembly requires two people. Position the Headboard (A) against the end of the pedestal assembly. Place four 5/16" Washers (E) over four 5/16" x 2-1/4" Hex Bolts (D) and thread the washer/bolts through the predrilled holes in the Pedestal Assembly and into the Headboard.
- Page 8 1448AFGSPa; 1448AFCAFa Pacific Queen Storage Bed Assembly Instructions This assembly requires two people. Place your bed into its final position; verify that all 6 Assembled Feet (ZG) are touching the floor and carrying weight, if needed, use a 7/16" wrench to adjust the Adjustable Glides (ZF) on the bottoms of the Assembled Feet (ZG).
Need help?
Do you have a question about the Pacific 1448AFGSPa and is the answer not in the manual?
Questions and answers