Whittier Wood 1153GBCHe Assembly Instructions Manual

Cascade 9-drawer dresser

Advertisement

Model #
1153GBCHe
Cascade
9-Drawer Dresser
Glazed Black Cherry finish
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on or in this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
09/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1153GBCHe and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood 1153GBCHe

  • Page 1 Never open more than one drawer at a time. Warning: At least one tipping restraint kit was included with your piece of Whittier Wood Furniture. When you receive your furniture, be sure to find and properly install the tipping restraint(s). If you cannot locate the restraint(s), please contact us immediately for replacement.
  • Page 2 #6 x 5/8" Undercut Screw (inserted) Hex Bumper (attached) M4 x 10mm Insert Nut (inserted) #8 x 7/8" Lo-Profile Screw (inserted) #8 x 1-1/4" Pan Head Screw (inserted) #8 x 1-5/8" Black Screw (inserted) 1153GBCHe — Page 2 — 09/13...
  • Page 3 #8 x 1-3/8" Lo-Profile Screw (inserted) Short Velvet 200 x 12mm (attached) Long Velvet 280 x 12mm (attached) Adjustable Glide with Hex Nut (installed) Assembled Foot (attached) 5/16" x 3/4" Insert Nut (inserted) Furniture Tipping Restraint (attached) 1 set 1153GBCHe — Page 3 — 09/13...
  • Page 4 Center Drawer (D). Pull the Hinged Drawer Stop (Va) forward and then pull the center drawer (D) out far enough so you can access the concealed storage space. To close the drawer, just push it shut. See Figure 2. Fig. 2 1153GBCHe — Page 4 — 09/13...
  • Page 5 Place the unit at its final destination. Rotate the Small Adjustable Glides (N) found at the corners of the unit and the Adjustable Glide with Hex Nut (ZP) at the bottom of the Assembled Foot (ZQ) until the unit is level. See Figure 3. Fig. 3 Continued on Page 6 1153GBCHe — Page 5 — 09/13...
  • Page 6 Before you begin this assembly, identify each part and make sure the quantities received match what is on this list. If you need to replace a part, contact Whittier Wood Furniture customer service and refer to the following list for its name and letter code.
  • Page 7 Fig. 5a Wall Floor Fig. 5 1153GBCHe — Page 7 — 09/13...

Table of Contents