DURKOPP ADLER 559 Instruction Manual page 201

B
26
Setting the sewing equipment
–
Press the keys "P" and "F" of the control panel simultaneously.
–
Enter code "2548".
–
Press the "OK" key.
The control switches to the technician level.
–
Select the menu "500" (configuration automatic buttonholer).
–
Press the "OK" key.
–
Select the menu "511"
–
Press the "OK" key.
–
Set the sewing equipment (the seam width will then be adjusted
automatically to match the sewing equipment - see table).
Class
559 - 151
Correction
–
Unscrew the side cover at the arm 1.
–
Screw out screw 3.
–
Screw the screw in drill-hole A or B according to the desired seam
width.
–
Switch the machine on.
2 A 1
Attention: Danger of breakage!
After altering the seam width, correct the looping stroke in any case.
Sewing equipment
narrow wide
E1501 E1521
E1502 E1522
E1504 E1524
E1551 E1571
E1553 E1573
E1590 E1595
B A 3