1. Manuals
  2. Brands
  3. Bematech Manuals
  4. Barcode Reader
  5. S302D
  6. Programming manual

Bematech S302D Programming Manual

2d imaging barcode scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P
G
ROGRAMMING
UIDE
S302D
2D Imaging
Barcode Scanner
Programming Guide
i
Advanced imaging barcode scanner

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S302D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bematech S302D

Summary of Contents for Bematech S302D

  • Page 1 ROGRAMMING UIDE S302D 2D Imaging Barcode Scanner Programming Guide Advanced imaging barcode scanner...

  • Page 2: General Handling Precautions

    ROGRAMMING UIDE Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material.

  • Page 3: Table Of Contents

    ROGRAMMING UIDE Table of Contents Important Notice ..................... i General Handling Precautions .................... i Guidance for Printing ......................i Settings and Programming ..................1 Programming Options ......................1 Default Factory Device Settings ..................1 Interface Mode ....................... 2 Interface Switch ......................... 2 Baud Rate ..........................
  • Page 4 ROGRAMMING UIDE Cap Locks ......................... 21 Symbologies......................22 Introduction ........................22 Message Length ....................... 22 Codabar ........................ 23 Codabar Enable/Disable ....................23 Codabar Stop/Start Characters ..................23 Codabar Check Characters ....................24 Codabar Message Length ....................24 Code 39 ......................... 25 Code 39 Enable/Disable ....................
  • Page 5 ROGRAMMING UIDE Code 128 Enable/Disable ....................37 Code 128 Message Length ....................37 Code 93 ......................... 38 Code 93 Enable/Disable ....................38 Code 93 Message Length ....................38 MSI ........................39 MSI Enable/Disable......................39 MSI Check Characters ...................... 39 MSI Message Length ......................40 Telepen .........................
  • Page 6 ROGRAMMING UIDE EAN-8 Check Digit ......................55 EAN-8 Check Digit Addenda ..................... 55 EAN-8 2 Check Digit Addenda ..................56 EAN-8 5 Check Digit Addenda ..................56 EAN-8 Addenda Required ....................57 EAN-8 Addenda Separator ....................57 UPC-A/EAN-13 Extend Coupon Code ................58 EAN.UCC Emulation ......................
  • Page 7 ROGRAMMING UIDE Aztec Message Length ..................... 74 Maxicode ......................... 75 Maxicode Message Length ....................75 Data Matrix ........................76 Data Matrix Message Length ................... 76 QR Code ........................... 77 QR Code Message Length ....................77 QR Code Advanced Data Setting ..................78 Maintenance ......................

  • Page 8: Settings And Programming

    ROGRAMMING UIDE Settings and Programming Scan selected barcodes in this manual to affect setup and programming of your handheld imaging barcode scanner. Decoding options and interface protocols can be tailored to a specific application. Setup parameters are stored in non-volatile memory in the scanner and are retained even when power is off.

  • Page 9: Interface Mode

    UIDE Interface Mode Interface Switch The S302D imaging barcode scanner supports USB virtual COM, USB-HID and RS232. The USB cable supports both USB virtual COM and USB-HID modes. Please install the virtual COM port driver before using USB Virtual COM.

  • Page 10: Baud Rate

    ROGRAMMING UIDE Baud Rate Baud rate is the number of bits of data transmitted per second. Set the imager's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form. 1200BPS 2400BPS 4800BPS...

  • Page 11: Word Format: Parity, Data Bits, Stop Bits

    ROGRAMMING UIDE 57600BPS 115200BPS (Default) Word Format: Parity, Data bits, Stop bits A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. Parity: checks character bit patterns for validity;...
  • Page 12 ROGRAMMING UIDE Even 7,1 Even 7,2 Even 8,1 Odd 7, 1 Odd 7, 2 Odd 8, 1 Advanced imaging barcode scanner...

  • Page 13: User Preferences

    ROGRAMMING UIDE User Preferences System Settings Scan this barcode to return all parameters to the default values. Set All Defaults Scan this barcode to enable AUX Scanner. Aux Scanner Enable Scan this barcode to show scanner version. Show Version Advanced imaging barcode scanner...

  • Page 14: Spanish Keyboard

    ROGRAMMING UIDE Spanish Keyboard To enable Spanish keyboard layout in USB HID interface, please scan all 3 barcodes below to complete the setting. Enable Spanish keyboard Code 128 Code Page: Binary Code 39 Code Page: Binary English Keyboard To return to English keyboard from Spanish keyboard scan the following barcode. Enable English keyboard Advanced imaging barcode scanner...

  • Page 15: Beeper-Good Read

    ROGRAMMING UIDE Beeper-Good Read To enable or disable beeper, scan the following barcodes. Beeper Volume-Good Read To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume barcode. Low Volume Medium Volume High Volume Advanced imaging barcode scanner...

  • Page 16: Beep During Good Decode

    ROGRAMMING UIDE Beep During Good Decode Scan a barcode below to select the duration of the beep signal after a good decode. Normal Short LED Illumination To enable or disable LED illumination, scan the following barcodes. (Default) Advanced imaging barcode scanner...

  • Page 17: Led-Good Read

    ROGRAMMING UIDE LED-Good Read To enable or disable LED indicator after a good read, scan the following barcodes. (Default) Number Of Beep-Good Read Scan a barcode below to select the number of the beep signal to sound after a good decode.
  • Page 18 ROGRAMMING UIDE Advanced imaging barcode scanner...

  • Page 19: Good Read Delay

    ROGRAMMING UIDE Good Read Delay Scan a barcode below to set the minimum amount of time before the imager can read another barcode after a good read. No Delay 200ms (Default) 500ms 2000ms *Specified *To set your own length for the good read delay, scan the “Specified” barcode, then set the delay by scanning digits from the Appendix, then scan “Save”.

  • Page 20: Same Code Delay

    ROGRAMMING UIDE Same Code Delay Scan a barcode below to set the minimum amount of time before the imager can read the same barcode a second time. No Delay 500ms (Default) 2000ms Advanced imaging barcode scanner...

  • Page 21: Scan Mode

    ROGRAMMING UIDE Scan Mode Scan a barcode below to set the imager to trigger manually or automatic scanning until a barcode has been read. Manual Trigger Mode (Default) Auto Scan Mode Manual Mode Timeout To a set timeout for the imager’s trigger when using Manual Trigger, scan the following “Timeout”...

  • Page 22: Centering Windows

    ROGRAMMING UIDE Centering Windows To change the field of view of your imager, scan “On” to enable the feature, and then scan one of the following barcodes to change the top, bottom, left, or right of the centering window. (Default) Left of centering window 40% Right of centering window 60% Top of centering window 40%...

  • Page 23: Ship Image

    ROGRAMMING UIDE Ship Image To ship the image stored in the imager memory, scan the follow barcode. JPG/BMP No Read Enable this function to transmit a No Read message when a code can not be read. (Default) Image Reverse Enable this function to allow the imager to read barcodes that are inverted. (Default) Advanced imaging barcode scanner...

  • Page 24: Data Redundant

    ROGRAMMING UIDE Data Redundant This function sets the imager to read the barcode multiple times before accepting data. Data Redundant Check = Off (Default) Data Redundant Check = 1 Data Redundant Check = 2 Data Redundant Check = 3 Advanced imaging barcode scanner...

  • Page 25: Data Editing

    ROGRAMMING UIDE Data Editing Prefix / Suffix Prefix and Suffix are additional characters that can be sent before and after the scanned data. Prefix Suffix To set up Prefix/Suffix: Prefix Set Up Flow Ex. If we wish to add “3” as prefix for all barcode type, then follow procedure as below, Scanning [prefix] to enter setup.

  • Page 26: Suffix Set Up Flow

    ROGRAMMING UIDE Suffix Set Up Flow Ex. If we wish to add “36” as suffix for all barcode type, then follow procedure as below, Scanning [suffix] to enter setup. Then we select barcode by scanning code ID of all barcode which is [9] [9], then we scan [3] [3] as 3 of ASCII HEX and [3] [6] as 6. Before we save, we scan command to setup terminator.

  • Page 27: Data Format

    ROGRAMMING UIDE Data Format To change the output format, scan the following barcodes. Data followed by <Enter> (Default) No message after data Data followed by <Enter> + new line Data followed by new line Data followed by TAB Advanced imaging barcode scanner...

  • Page 28: Cap Locks

    ROGRAMMING UIDE Cap Locks To change the capital lock preferences, scan the following barcodes. Cap Locks On Cap Locks Off Advanced imaging barcode scanner...

  • Page 29: Symbologies

    ROGRAMMING UIDE Symbologies Introduction This chapter describes symbology features and provides the programming barcodes for selecting these features. The device is shipped with the settings shown in the Symbology Default Table. If the default values suit requirements, programming is not necessary. There are two ways to change a parameter value: ...

  • Page 30: Codabar

    ROGRAMMING UIDE Codabar Codabar Enable/Disable To set Codabar to its default settings, scan Default; to enable or disable Codabar, scan On or Off. Default (Default) Codabar Stop/Start Characters Stop/Start Characters set the leading and trailing ends of the barcode. Don’t Transmit (Default) Transmit Advanced imaging barcode scanner...

  • Page 31: Codabar Check Characters

    ROGRAMMING UIDE Codabar Check Characters Scan a barcode below to set the Codabar check character preferences. No Check Character (Default) Validate But Don’t Transmit Validate And Transmit Codabar Message Length Please see Message Length on setting the message length. Maximum (Default: 60) Minimum (Default: 4)

  • Page 32: Code 39

    ROGRAMMING UIDE Code 39 Code 39 Enable/Disable To set Code 39 to its default settings, scan Default; to enable or disable Code 39, scan On or Off. Default (Default) Code 39 Full ASCII Conversion Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set.

  • Page 33: Code 39 Append

    ROGRAMMING UIDE Code 39 Append To set the imager to append Code 39 data before transmitting to the host, scan the appropriate barcode below. (Default) Code 39 Check Characters Scan a barcode below to set the Code 39 check character preferences. No Check Character (Default) Validate But Don’t Transmit...

  • Page 34: Code 39 Start/Stop Characters

    ROGRAMMING UIDE Code 39 Start/Stop Characters Start/Stop Characters set the leading and trailing ends of the barcode. Transmit Don’t Transmit (Default) Code 32 Pharmaceutical To enable/ disable Code 39 Pharmaceutical, scan the appropriate barcode below. (Default) Advanced imaging barcode scanner...

  • Page 35: Code 39 Message Length

    ROGRAMMING UIDE Code 39 Message Length Please see Message Length on setting the message length. Minimum (Default: 0) Maximum (Default: 48) Trioptic To enable/ disable Trioptic code, scan the appropriate barcode below. (Default) Advanced imaging barcode scanner...

  • Page 36: Interleaved 2 Of 5

    ROGRAMMING UIDE Interleaved 2 of 5 Interleaved 2 of 5 Enable/Disable To set Interleaved 2 of 5 to its default settings, scan Default; to enable or disable Interleaved 2 of 5, scan On or Off. Default (Default) Advanced imaging barcode scanner...

  • Page 37: Interleaved 2 Of 5 Check Characters

    ROGRAMMING UIDE Interleaved 2 of 5 Check Characters Scan a barcode below to set the Interleaved 2 of 5 check character preferences. No Check Character (Default) Validate But Don’t Transmit Validate And Transmit Interleaved 2 of 5 Message Length Please see Message Length on setting the message length.

  • Page 38: Nec 25

    ROGRAMMING UIDE NEC 25 NEC 25 Enable/Disable To set NEC 25 to its default settings, scan Default; to enable or disable NEC 25, scan On or Off. Default (Default) Advanced imaging barcode scanner...

  • Page 39: Nec 25 Check Characters

    ROGRAMMING UIDE NEC 25 Check Characters Scan a barcode below to set the NEC 25 check character preferences. No Check Character (Default) Validate But Don’t Transmit Validate And Transmit Advanced imaging barcode scanner...

  • Page 40: Straight 2 Of 5 Industrial

    ROGRAMMING UIDE Straight 2 of 5 Industrial Straight 2 of 5 Industrial Enable/Disable To set Straight 2 of 5 Industrial to its default settings, scan Default; to enable or disable Straight 2 of 5 Industrial, scan On or Off. Default (Default) Straight 2 of 5 Message Length Please see...

  • Page 41: Matrix 2 Of 5

    ROGRAMMING UIDE Matrix 2 of 5 Matrix 2 of 5 Enable/Disable To set Matrix 2 of 5 to its default settings, scan Default; to enable or disable Matrix 2 of 5, scan On or Off. Default (Default) Matrix 2 of 5 Message Length Please see Message Length on setting the message length.

  • Page 42: Code 11

    ROGRAMMING UIDE Code 11 Code 11 Enable/Disable To set Code 11 to its default settings, scan Default; to enable or disable Code 11, scan On or Off. Default (Default) Code 11 Check Characters Scan a barcode below to set the Code 11 check character preferences. 2 Check Digit (Default) 1 Check Digit...

  • Page 43: Code 11 Message Length

    ROGRAMMING UIDE Code 11 Message Length Please see Message Length on setting the message length. Minimum (Default: 4) Maximum (Default: 80) Advanced imaging barcode scanner...

  • Page 44: Code 128

    ROGRAMMING UIDE Code 128 Code 128 Enable/Disable To set Code 128 to its default settings, scan Default; to enable or disable Code 128, scan On or Off. Default (Default) Code 128 Message Length Please see Message Length on setting the message length. Maximum (Default: 80) Minimum...

  • Page 45: Code 93

    ROGRAMMING UIDE Code 93 Code 93 Enable/Disable To set Code 93 to its default settings, scan Default; to enable or disable Code 93, scan On or Off. Default (Default) Code 93 Message Length Please see Message Length on setting the message length. Maximum (Default: 80) Minimum...

  • Page 46: Msi

    ROGRAMMING UIDE MSI Enable/Disable To set MSI to its default settings, scan Default; to enable or disable MSI, scan On or Off. Default (Default) MSI Check Characters Scan a barcode below to set the MSI check character preferences. Validate Type 10, Transmit Validate Type 10, Don’t Transmit (Default) Advanced imaging barcode scanner...

  • Page 47: Msi Message Length

    ROGRAMMING UIDE MSI Message Length Please see Message Length on setting the message length. Minimum (Default: 4) Maximum (Default: 48) Advanced imaging barcode scanner...

  • Page 48: Telepen

    ROGRAMMING UIDE Telepen Telepen Enable/Disable To set Telepen to its default settings, scan Default; to enable or disable Telepen, scan On or Off. Default (Default) Telepen Output Scan a barcode below to set the Telepen Output preferences. Original Output AIM Output (Default) Advanced imaging barcode scanner...

  • Page 49: Telepen Message Length

    ROGRAMMING UIDE Telepen Message Length Please see Message Length on setting the message length. Minimum (Default: 1) Maximum (Default: 60) Advanced imaging barcode scanner...

  • Page 50: Upc/Ean/Jan

    ROGRAMMING UIDE UPC/EAN/JAN UPC-A Enable/Disable To set UPC-A to its default settings, scan Default; to enable or disable UPC-A, scan On or Off. Default (Default) UPC-A Check Characters Scan a barcode below to set the UPC-A check character preferences. (Default) Advanced imaging barcode scanner...

  • Page 51: Upc-A Number System

    ROGRAMMING UIDE UPC-A Number System Scan a barcode below to set the UPC-A Number System preferences. (Default) UPC-A 2 Digit Scan a barcode below to set the UPC-A 2 Digit preferences. (Default) Advanced imaging barcode scanner...

  • Page 52: Upc-A 5 Digit

    ROGRAMMING UIDE UPC-A 5 Digit Scan a barcode below to set the UPC-A 5 Digit preferences. (Default) UPC-A Addenda Required Scan a barcode below to set the UPC-A Addenda Required preferences. (Default) Advanced imaging barcode scanner...

  • Page 53: Upc-A Addenda Separator

    ROGRAMMING UIDE UPC-A Addenda Separator Scan a barcode below to set the UPC-A Addenda Separator preferences. (Default) UPC-E0 To set UPC-E0 to its default settings, scan Default; to enable or disable UPC-E0, scan On or Off. Default (Default) Advanced imaging barcode scanner...

  • Page 54: Upc-E1

    ROGRAMMING UIDE UPC-E1 Scan a barcode below to set the UPC-E1 preferences. (Default) UPC-E0 Expand Scan a barcode below to set the UPC-E0 Expand preferences. (Default) Advanced imaging barcode scanner...

  • Page 55: Upc-E0 Check Digit

    ROGRAMMING UIDE UPC-E0 Check Digit Scan a barcode below to set the UPC-E0 Check Digit preferences. (Default) UPC-E0 Number System Scan a barcode below to set the UPC-E0 Number System preferences. (Default) Advanced imaging barcode scanner...

  • Page 56: Upc-E0 Addenda 2 Digit

    ROGRAMMING UIDE UPC-E0 Addenda 2 Digit Scan a barcode below to set the UPC-E0 Addenda 2 Digit preferences. (Default) UPC-E0 Addenda 5 Digit Scan a barcode below to set the UPC-E0 Addenda 5 Digit preferences. (Default) Advanced imaging barcode scanner...

  • Page 57: Upc-E0 Addenda Required

    ROGRAMMING UIDE UPC-E0 Addenda Required Scan a barcode below to set the UPC-A Addenda Required preferences. Not Required (Default) Required UPC-E0 Addenda Separator Scan a barcode below to set the UPC-A Addenda Separator preferences. (Default) Advanced imaging barcode scanner...

  • Page 58: Ean/Jan-13

    ROGRAMMING UIDE EAN/JAN-13 To set EAN/JAN-13 to its default settings, scan Default; to enable or disable EAN/JAN-13, scan On or Off. Default (Default) EAN/JAN-13 Check Digit Scan a barcode below to set the EAN/JAN-13 Check Digit preferences. (Default) Advanced imaging barcode scanner...

  • Page 59: Ean/Jan-13 2 Check Digit Addenda

    ROGRAMMING UIDE EAN/JAN-13 2 Check Digit Addenda Scan a barcode below to set the EAN/JAN-13 2 Check Digit Addenda preferences. (Default) EAN/JAN-13 5 Check Digit Addenda Scan a barcode below to set the EAN/JAN-13 5 Check Digit Addenda preferences. (Default) Advanced imaging barcode scanner...

  • Page 60: Ean/Jan-13 Addenda Required

    ROGRAMMING UIDE EAN/JAN-13 Addenda Required Scan a barcode below to set the UPC-A Addenda Required preferences. Not Required (Default) Required EAN/JAN-13 Addenda Separator Scan a barcode below to set the UPC-A Addenda Separator preferences. (Default) Advanced imaging barcode scanner...

  • Page 61: Ibsn Translate

    ROGRAMMING UIDE IBSN Translate Scan a barcode below to set the IBSN Translate preferences. (Default) EAN-8 To set EAN -8 to its default settings, scan Default; to enable or disable EAN-8, scan On or Off. Default (Default) Advanced imaging barcode scanner...

  • Page 62: Ean-8 Check Digit

    ROGRAMMING UIDE EAN-8 Check Digit Scan a barcode below to set the EAN-8 Check Digit preferences. (Default) EAN-8 Check Digit Addenda Scan a barcode below to set the EAN-8 Check Digit Addenda preferences. (Default) Advanced imaging barcode scanner...

  • Page 63: Check Digit Addenda

    ROGRAMMING UIDE EAN-8 2 Check Digit Addenda Scan a barcode below to set the EAN-8 2Check Digit Addenda preferences. (Default) EAN-8 5 Check Digit Addenda Scan a barcode below to set the EAN-8 5 Check Digit Addenda preferences. (Default) Advanced imaging barcode scanner...

  • Page 64: Ean-8 Addenda Required

    ROGRAMMING UIDE EAN-8 Addenda Required Scan a barcode below to set the EAN-8 Addenda Required preferences. Not Required (Default) Required EAN-8 Addenda Separator Scan a barcode below to set the EAN-8 Addenda Separator preferences. (Default) Advanced imaging barcode scanner...

  • Page 65: Upc-A/Ean-13 Extend Coupon Code

    ROGRAMMING UIDE UPC-A/EAN-13 Extend Coupon Code Scan a barcode below to set the UPC-A/EAN-13 Extend Coupon Code preferences. (Default) EAN.UCC Emulation Scan a barcode below to set the EAN.UCC Emulation preferences. (Default) EAN.UCC-128 Emulation RSS. Emulation Advanced imaging barcode scanner...

  • Page 66: Postal Code

    ROGRAMMING UIDE Postal Code Note: For best performance when reading a postal code, please enable only one postal symbology and disable the rest. To enable or disable a postal code, please scan the following barcode first to enter programming mode, then scan the On or Off barcode for your postal code. Postal Code China Postal Code To set China Postal Code to its default settings, scan Default;...

  • Page 67: China Postal Code Message Length

    ROGRAMMING UIDE China Postal Code Message Length Please see Message Length on setting the message length. Minimum (Default: 4) Maximum (Default: 80) Han Xin Code To set Han Xin Code to its default settings, scan Default; to enable or disable Han Xin Code, scan On or Off.

  • Page 68: Han Xin Code Message Length

    ROGRAMMING UIDE Han Xin Code Message Length Please see Message Length on setting the message length. Minimum (Default: 1) Maximum (Default: 7873) Korean Postal Code To set Korean Postal Code to its default settings, scan Default; to enable or disable Korean Postal Code, scan On or Off.

  • Page 69: Korean Postal Code Message Length

    ROGRAMMING UIDE Korean Postal Code Message Length Please see Message Length on setting the message length. Minimum (Default: 4) Maximum (Default: 48) PostNet Scan a barcode below to enable or disable PostNet. (Default) Advanced imaging barcode scanner...

  • Page 70: Postnet Check Digit

    ROGRAMMING UIDE PostNet Check Digit Scan a barcode below to set the PostNet Check Digit preferences. Not Transmit (Default) Transmit Planet Code Scan a barcode below to enable or disable Planet Code. (Default) Advanced imaging barcode scanner...

  • Page 71: Planet Code Check Digit

    ROGRAMMING UIDE Planet Code Check Digit Scan a barcode below to set the Planet Code Check Digit preferences. Don’t Transmit (Default) Transmit British Post Scan a barcode below to enable or disable British Post code. (Default) Advanced imaging barcode scanner...

  • Page 72: Japanese Post

    ROGRAMMING UIDE Japanese Post Scan a barcode below to enable or disable Japanese Post code. (Default) Canadian Post Scan a barcode below to enable or disable Canadian Post code. (Default) Advanced imaging barcode scanner...

  • Page 73: Kix Post

    ROGRAMMING UIDE Kix Post Scan a barcode below to enable or disable Kix Post code. (Default) Australian Post Scan a barcode below to enable or disable Australian Post code. (Default) Advanced imaging barcode scanner...

  • Page 74: Rss (Reduced Space Symbology)

    ROGRAMMING UIDE RSS (Reduced Space Symbology) The variants of RSS are RSS 14, RSS Expanded, and RSS Limited. The limited and expanded versions have stacked variants. Scan the appropriate barcode below to enable or disable each variant of RSS. RSS-14 To set RSS-14 to its default settings, scan Default;...

  • Page 75: Rss-Limited Code

    ROGRAMMING UIDE RSS-Limited Code To set RSS-Limited Code to its default settings, scan Default; to enable or disable RSS- Limited, scan On or Off. Default (Default) Advanced imaging barcode scanner...

  • Page 76: Rss-Expanded Code

    ROGRAMMING UIDE RSS-Expanded Code To set RSS-Expanded Code to its default settings, scan Default; to enable or disable RSS- Expanded, scan On or Off. Default (Default) RSS-Expanded Code Message Length Please see Message Length on setting the message length. Maximum Minimum Advanced imaging barcode scanner...

  • Page 77: 2D Symbologies

    ROGRAMMING UIDE 2D Symbologies PDF417 To set PDF417 to its default settings, scan Default; to enable or disable PDF417, scan On or Off. Default (Default) PDF417 Message Length Please see Message Length on setting the message length. Maximum (Default: 2750) Minimum (Default: 1) Advanced imaging barcode scanner...

  • Page 78: Micro Pdf417

    ROGRAMMING UIDE Micro PDF417 To set Micro PDF417 to its default settings, scan Default; to enable or disable Micro PDF417, scan On or Off. Default (Default) Micro PDF417 Message Length Please see Message Length on setting the message length. Maximum (Default: 366) Minimum (Default: 1)

  • Page 79: Tlc39

    ROGRAMMING UIDE TLC39 Scan a barcode below to enable or disable TLC39. (Default) Advanced imaging barcode scanner...

  • Page 80: Codablock F

    ROGRAMMING UIDE Codablock F To set Codablock F to its default settings, scan Default; to enable or disable Codablock F, scan On or Off. Default (Default) Codablock F Message Length Please see Message Length on setting the message length. Maximum (Default: 2048) Minimum (Default: 1)

  • Page 81: Aztec

    ROGRAMMING UIDE Aztec To set Aztec to its default settings, scan Default; to enable or disable Aztec, scan On or Off. Default (Default) Aztec Message Length Please see Message Length on setting the message length. Maximum (Default: 3832) Minimum (Default: 1) Advanced imaging barcode scanner...

  • Page 82: Maxicode

    ROGRAMMING UIDE Maxicode To set Maxicode to its default settings, scan Default; to enable or disable Maxicode, scan On or Off. Default Maxicode Message Length Please see Message Length on setting the message length. Maximum (Default: 150) Minimum (Default: 1) Advanced imaging barcode scanner...

  • Page 83: Data Matrix

    ROGRAMMING UIDE Data Matrix To set Data Matrix to its default settings, scan Default; to enable or disable Data Matrix, scan On or Off. Default (Default) Data Matrix Message Length Please see Message Length on setting the message length. Maximum (Default: 3116) Minimum (Default: 1)

  • Page 84: Qr Code

    ROGRAMMING UIDE QR Code To set QR Code to its default settings, scan Default; to enable or disable QR Code, scan On or Off. Default (Default) QR Code Message Length Please see Message Length on setting the message length. Maximum (Default: 7089) Minimum (Default: 1)

  • Page 85: Qr Code Advanced Data Setting

    ROGRAMMING UIDE QR Code Advanced Data Setting To change the GS1 Send Keystroke for FNC1 from default [F8] to "$", scan barcode below. Send $ Advanced imaging barcode scanner...

  • Page 86: Maintenance

    ROGRAMMING UIDE Maintenance Cleaning the scan window is the only maintenance required. A dirty window may affect scanning accuracy. Never use any abrasive material or solvents on the window. Do not spray water or other cleaning liquids directly onto the window. Remove dirt by wiping gently with a damp cloth or tissue moistened with water and/or ammonia.

  • Page 87: Standard Default Parameters

    ROGRAMMING UIDE Appendix A Standard Default Parameters Symbology Default Codabar Enable Code 39 Enable Code 39 Full ASCII Disable Code 39 Append Disable Code 39 Check Char No check char Code 39 start/stop char Don’t transmit Code 32 Pharmaceutical Disable Code 39 Message Length 0~48 Interleaved 2 of 5...
  • Page 88 ROGRAMMING UIDE Code 128 Message Length 0~80 Code 93 Enable Code 93 Message Length 0~80 Disable MSI Message Length 4~48 Validate Type 10, MSI Check Char Don’t Transmit Telepen Disable Telepen Output AIM output Telepen Message Length 1~60 UPC-A Enable UPC-A Check char Enable UPC-A Number System...
  • Page 89 ROGRAMMING UIDE EAN/JAN-13 2 Check Digit Disable Addenda EAN/JAN-13 5 Check Digit Disable Addenda EAN/JAN-13 Addenda Not required Required EAN/JAN-13 Addenda Enable Separator IBSN Translate Disable EAN-8 Enable EAN-8 Check Digit Enable EAN-8 2 Check Digit Addenda Disable EAN-8 5 Check Digit Addenda Disable EAN-8 Addenda Required Not required...
  • Page 90 ROGRAMMING UIDE Codablock F Disable Codablock F Message Length 1~2048 Aztec Enable Aztec Message Length 1~3832 Maxicode Enable Maxicode Message Length 1~150 Data Matrix Enable Data Matrix Message Length 1~3116 Enable QR Message Length 1~7089 Han Xin Code Disable Han Xin CodeMessage Length 1~7873 Korean Postal Code Disable...

  • Page 91: Code Id Table

    ROGRAMMING UIDE Appendix B Code ID Table Symbology Code ID Code ID in HEX Code 128 GS1-128(UCC/EAN-128) AIM-128 EAN-8 EAN-13 ISSN ISBN UPC-E UPC-A Interleaved 2 of 5 ITF-6 ITF-14 Matrix 2 of 5 Industrial 2 of 5 Standard 2 of 5 Code 39 Codabar Code 93...

  • Page 92: Sample Barcodes

    ROGRAMMING UIDE Appendix C Sample Barcodes Canada Post 4-State 01,K1A0B1,7010, Japan Post 4-State 80342716666 US POSTNET 8034271888 Australian Post 8034271999 Dutch Post - Royal TPG Post KIX 4-State 1231FZ13XHS USPS PLANET Barcode 4012345235636 British Royal Mail 4-State BPO 1234567895 Advanced imaging barcode scanner...
  • Page 93 ROGRAMMING UIDE Infomail Mail 4-State Sweden Post 4-State China Post Advanced imaging barcode scanner...
  • Page 94 ROGRAMMING UIDE USPS 4-state (Intelligent Mail) Barcode ID..82 Service Type ID..152 Mailer ID..568794 Serial Number..748970563 ZIP Code...12789600178 Barcode ID..00 Service Type ID..311 Mailer ID..000479 Serial Number..612518080 ZIP Code...20724170703 Barcode ID..20 Service Type ID..301 Mailer ID..901212001 Serial Number..311323 ZIP Code...20724170703 Advanced imaging barcode scanner...

  • Page 95: Numeric Barcodes

    ROGRAMMING UIDE Appendix D Numeric Barcodes For parameters requiring specific numeric values, scan the appropriately numbered barcode(s). Advanced imaging barcode scanner...
  • Page 96 ROGRAMMING UIDE Advanced imaging barcode scanner...
  • Page 97 ROGRAMMING UIDE Advanced imaging barcode scanner...

  • Page 98: Save

    ROGRAMMING UIDE Save To save the setting, scan the barcode below. Save Discard To correct an error or change a selection, scan the barcode below. Discard Advanced imaging barcode scanner...

  • Page 99: Full Ascii Table

    ROGRAMMING UIDE Appendix E Full ASCII Table ASCII Hexacode ASCII Hexacode Full ASCII ---SI Full ASCII ---NUL Function key-----“Shift” Full ASCII ---SOH Full ASCII ---DLE Function key-----“Ins” Function key-----“5(num)” Full ASCII ---STX Full ASCII ---DC1 Function key-----“Del” Function key-----“F1” Full ASCII ---ETX Full ASCII ---DC2 Function key-----“Home”...
  • Page 100 ROGRAMMING UIDE Full ASCII ---RS Full ASCII ---- Function key-----“CTL(L)” Full ASCII ---US Full ASCII ---. Function key-----“ALT(L)” Full ASCII ---SP Full ASCII ---/ Full ASCII ---! Full ASCII ---0 Full ASCII ---“ Full ASCII ---1 Full ASCII ---# Full ASCII ---2 Full ASCII ---$ Full ASCII ---3 Full ASCII ---%...
  • Page 101 ROGRAMMING UIDE Full ASCII ---@ Full ASCII ---O Full ASCII ---A Full ASCII ---P Full ASCII ---B Full ASCII ---Q Full ASCII ---C Full ASCII ---R Full ASCII ---D Full ASCII ---S Full ASCII ---E Full ASCII ---T Full ASCII ---F Full ASCII ---U Full ASCII ---G Full ASCII ---V...
  • Page 102 ROGRAMMING UIDE Full ASCII ---b Full ASCII ---q Full ASCII ---c Full ASCII ---r Full ASCII ---d Full ASCII ---s Full ASCII ---e Full ASCII ---t Full ASCII ---f Full ASCII ---u Full ASCII ---g Full ASCII ---v Full ASCII ---h Full ASCII ---w Full ASCII ---x Full ASCII ---|...

Table of Contents