Whittier Wood 1317AFGAC Assembly Instructions Manual

Mckenzie queen platform storage bed

Advertisement

Quick Links

Model #
1317AFGAC
McKenzie
Queen Platform
Storage Bed
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
y y reading the Assembly Instructions before you
b
begin your project.
For normal household use only.
recommended for commercial use.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
800-653-3336
800-653-3336
Outside U.S. or Canada: 541- 687- 0213
Outside U.S. or Canada: 541- 687- 0213
Fax: 541-687-2060 •
Fax: 541-687-2060 • w ww
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may be
affecting the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
Production Code:
V N
We will replace parts
w ww.whittie
.whittier r wood.com
wood.com
07/29/08

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1317AFGAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood 1317AFGAC

  • Page 1 Model # 1317AFGAC McKenzie Service Policy: We will replace parts Queen Platform which are defective, missing or damaged. Please contact Whittier Wood Products Storage Bed customer service department directly (by phone, fax, mail or E-mail) for replacement parts. Assembly Instructions Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Page 2 M — Large Drawer Face — Qty. 1 (pre-attached) O — Knob — Qty. 3 N — #8 x 1½" Machine Screw — Qty. 3 Q — Drawer Slides — Qty. 3 (pre-installed sets) Page 2 — 1317AFGAC — 07/08...
  • Page 3 1317AFGAC McKenzie Queen Platform Storage Bed Assembly Instructions This Assembly Requires Two People TOOLS REQUIRED: Phillips screwdriver, 7/16" wrench and tape measure. Shipping Straps Fig. 1 Remove the Trestles (C/D) from the back of the Headboard (A) as seen in Fig. 1 and place them off to the side.
  • Page 4 Trestles with T-Nuts (D) between Pedestals (I) and insert 1¾" bolt (F) and washer (H) as shown in Fig. 4b. When installing Trestles (D), make sure the T-Nuts face out as shown in Fig. 4. Page 4 — 1317AFGAC — 07/08...
  • Page 5 T-Nuts (D) toward the ends of the Assembly from the center as shown in Fig 6. Insert 2½" Hex Bolt (G) and Washer (H). See Fig. 6b. DO NOT TIGHTEN BOLTS UNTIL FINAL ASSEMBLY IN STEP 10. Page 5 — 1317AFGAC — 07/08...
  • Page 6 On each inner Pair of Trestles (C & D), place a Foot Assembly (U) between the two middle trestles as shown in Fig. 7. Insert three #8 X 2" Black screws (T) as shown in Fig. 7b. Rotate Pedestal Assembly to its original position. Fig. 8 Page 6 — 1317AFGAC — 07/08...
  • Page 7 Attach Headboard (A) to Pedestal Assembly as in previous step. NOTE: NOW TIGHTEN ALL BOLTS ON TRESTLES. Fig. 11 Leveler Bracket (V) Adjustable Glide (W) Adjust Glides (W) on the Foot Assemblies (U) so the Glides just touch the floor. Page 7 — 1317AFGAC — 07/08...
  • Page 8 Place Deckboards (P) as shown in Fig. 12. There should be a small gap between each deckboard. Secure with #8x1¼" Screw (E). Carefully align drawer slides into the cabinet and gently push the drawers back to their original positions. Sleep well, and enjoy! Page 8 — 1317AFGAC — 07/08...

Table of Contents