Download Print this page

Whittier Wood 7131GDRC Assembly Instructions Manual

Northgate queen storage bed glazed dark chestnut finish

Advertisement

Quick Links

Model #
7131GDRC
Northgate Queen Storage Bed
Glazed Dark Chestnut finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Remove items before you move this unit.
Do not overload the drawers.
Before you load or move this unit, tighten all screws
and supports.
• Before you begin your project, completely read the
Assembly Instructions.
• Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
• Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
• This assembly requires two people.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
Production Code:
VN
09/11

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7131GDRC and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood 7131GDRC

  • Page 1 To Order: Provide the finish and furniture model number missing or damaged during assembly. For a replacement (upper portion of this page), the part letter, production part, contact Whittier Wood Products customer service code, quantity needed, reason for replacement and your department by phone, fax, mail or email.
  • Page 2 Right Bracket (attached) Steel Brace (attached) #6 x 3/4" Brass Flat Head Screw (inserted) #8 x 1" Black Screw (inserted) #8 x 1-3/16" Pan Head Screw (inserted) #8 x 1-1/4" Pan Head Screw (inserted) 7131GDRC — Page 2 — 09/11...
  • Page 3 Large Foot Assembly Foot Bracket (attached) Large Adjustable Glide (installed) Pull (attached) M4 x 25mm Machine Screw (installed) Drawer Slides (pre-installed sets) #6 x 1/2" Philtruss Screw (20 inserted) #6 x 3/4" Philtruss Screw (inserted) 7131GDRC — Page 3 — 09/11...
  • Page 4 Description Quantity 1/4" x 1-1/2" Hex Bolt Washer Bracket #6 x 5/8" Philtruss Screw (8 inserted) 1/4” x 1/2” Insert Nut (inserted) #8 x 1" Lo-Profile Screw (inserted) Lever Lock (attached) Pad Strip (attached) 7131GDRC — Page 4 — 09/11...
  • Page 5 7133GDRC Queen/King Bed Rail Kit (x1) Part Description Quantity Left Bracket (attached) Right Bracket (attached) #6 x 3/4" Brass Flat Head Screw (inserted) #8 x 1" Black Screw (inserted) Left Side Rail Right Side Rail Plate (attached) 7131GDRC — Page 5 — 09/11...
  • Page 6 To attach the Footboard Assembly (J) to the Left Side Rail (ZM), align the Brackets (C) and slide the Left Side Rail down on to the Footboard Assembly (J). See Figures 2 and 2a. Fig. 2a Fig. 2 7131GDRC — Page 6 — 09/11...
  • Page 7 Repeat step two for the Right Side Rail (ZN) and Brackets (D). See Figures 3 and 3a. Fig. 3 Fig. 3a Align the Brackets on both sides and slide the Rail/Footboard assembly down on to the Headboard (A). See Figure 4. Fig. 4 7131GDRC — Page 7 — 09/11...
  • Page 8 Lock Position Fig. 5a Fig. 5 Headboard removed for illustration purposes. Attach a Small Assembled Foot (R) to each of the two of the Bottom Slats (L) as shown in Figure 6. Fig. 6 7131GDRC — Page 8 — 09/11...
  • Page 9 Bottom Deckboards (O) over brackets at the headboard end of the assembly as shown in Figure 9. There should be a small gap between each deckboard. Secure with #6x5/8" Philtruss Screws (ZH). x 24 Fig. 9 7131GDRC — Page 9 — 09/11...
  • Page 10 11. Attach the center Top Slat (K) to the Headboard and Footboard bracket using a 90° bracket (ZG) and #6 x 1/2" Philtruss Screws (ZC) as shown in Figure 11 and 11a. Fig. 11a Fig. 11 7131GDRC — Page 10 — 09/11...
  • Page 11 12. Place the Top Notched Deckboard (Q) with the notches facing the Headboard. Place the Top Deckboard (P) as shown in Figure 12. There are holes in these two deckboards for easy access to the open storage area below. Fig. 12 7131GDRC — Page 11 — 09/11...