Igloohome Deadbolt 2S Installer/User Manual page 25

Lock Tutorial
Edit PIN codes
5
Once PIN code is generated, user must key the generated code onto the Keybox keypad
followed by # to activate the code before proceeding. To change the PIN, enter:
Press * > Key 1 0 and tap # > Current PIN and tap # > New 4 - 9 digit PIN and tap # > New
4 - 9 digit PIN and tap #
Current PIN Code
New PIN Code
On Keypad
* Only active Permanent and Duration PINs can be edited on the Keybox.
Removing used PIN codes from app view
6
Go to Home > Select Lock Name >
The PIN code will be removed from your app view.
* Only inactive PINs can be removed.
7
Resetting PIN Codes
Ensure that Bluetooth is switched on, and you are within Bluetooth range of the lock.
Go to Home > Select Lock Name >
Lock will reset all codes except for Master PIN, and all PIN codes previously generated are
no longer valid.
Enabling & Disabling Timer Re-Lock*
8
To Enable
To Disable
* By default, Timer Re-lock is disabled.
1234 5678
010101
Press * > Key 1 0 # > 1234 5678 # > 010101 # > 010101 #
> ' INACTIVE ' > Select PIN >
>
* 2 1 # <Master PIN> # <Duration between 5-120 seconds> #
* 2 0 # <Master PIN> #
- on igloohome App
>
Reset Lock
- on Deadbolt 2S
25