Advertisement
49-7574 v06 6/7/07 9:44 AM Page 8
Thermostat programming (cont.).
Step One
Press the PROGRAM button to put the thermostat into the programming mode. The display
will blink all of the day-of-the-week icons. Pressing the UP or DOWN button will toggle between
the weekday icons and the weekend icons. Ensure the display is blinking the one you want to
program. Press HEAT/COOL.
Step Two
Next, the morning period will blink. Use the UP or DOWN button to toggle through Morning,
Day, Evening or Night, stopping at the period you want to program. Press HEAT/COOL.
Step Three
Next, the hour of the day will blink. This is the starting hour of the period you have selected.
Use the UP or DOWN button to change the selected hour start time. Press HEAT/COOL.
Step Four
The minute of the day will blink next. This is the starting minute in the hour. Use the UP or
DOWN button to change the minute digits to the desired setting. (Note that minutes change
in five-minute increments.) Press HEAT/COOL.
Step Five
The desired set point will now be blinking. This is the temperature you want the thermostat to
go to at the time of day you have selected. Press the UP or DOWN button to change to the
desired set point temperature. Press HEAT/COOL.
This completes the programming of the first period of the day.
Step Six
If you started with the Morning time period, the next period, Day, will now be blinking. Follow
steps two, three, four and five for each period you wish to program.
8
Advertisement
