Download Print this page
Iso-Tech IDM19 Operating Instructions

Iso-Tech IDM19 Operating Instructions

Pocket digital multimeter
Hide thumbs Also See for IDM19:

Advertisement

Quick Links

OPERATING INSTRUCTIONS
POCKET
DIGITAL MULTIMETER
DC
AC
0
10
2 0
30
RANGE
HOLD
DC/AC
VOLT
OFF
AUTO POWER OFF
600V
MAX
600V
CATIII 300V CATII 600V
SAFETY INFORMATION
The following safety information must be observed
to insure maximum personal safety during the
operation at this meter:
Do not use the meter if the meter or test leads look
damaged, or if you suspect that the meter is not
operating properly.
Never ground yourself when taking electrical
measurements. Do not touch exposed metal pipes,
outlets, fixtures, etc., which might be at ground
potential. Keep your body isolated from ground by
using dry clothing, rubber shoes, rubber mats, or
any approved insulating material.
Turn off power to the circuit under test before
cutting, unsoldering, or breaking the circuit. Small
amounts of current can be dangerous.
Use caution when working above 60V dc or 30V ac
rms. Such voltages pose a shock hazard.
When using the probes, keep your fingers behind
the finger guards on the probes.
Measuring voltage which exceeds the limits of the
multimeter may damage the meter and expose the
operator to a shock hazard. Always recognize the
meter voltage limits as stated on the front of the
meter.
SPECIFICATIONS
Display: 3½digit liquid crystal display (LCD) with
a maximum reading of 3400, with a 34-segment
analog bar-graph.
Polarity: Automatic, (-) negative polarity
indication.
Overrange: "OL" mark indication.
Low battery indication: The "
" is displayed
when the battery voltage drops below the operating
level.
Measurement rate: 2 times per second, nominal.
Bar graph: 20 times per second.
Auto power off: approx. 8 minutes.
Operating environment: 0°C to 40°C (32°F to
144°F) at <70% R.H.
Storage temperature: -20°C to 60°C (-4°F to
140°F) at < 80% R.H. with battery removed from
meter.
Temperature Coefficient: 0.1 x (specified accuracy)
per °C. (0°C to 18°C, 28°C t o 40°C).
Power: Two 1.5 button-type batteries (IEC # LR-44,
NEDA # 1166A).
Battery life: 70 hours continuous operation.
Dimensions: 125mm (H) x 60mm (W) x 24mm
(D).
Weight: Approx. 3.9 oz. (110g) including batteries
and case.
(Accuracy at 23°C ± 5°C, <70% R.H.)

Advertisement

loading

Summary of Contents for Iso-Tech IDM19

  • Page 1 OPERATING INSTRUCTIONS SAFETY INFORMATION SPECIFICATIONS POCKET DIGITAL MULTIMETER The following safety information must be observed Display: 3½digit liquid crystal display (LCD) with to insure maximum personal safety during the a maximum reading of 3400, with a 34-segment operation at this meter: analog bar-graph.
  • Page 2 Measuring Voltage Auto Power off BATTERY REPLACEMENT OPERATION 1. Set the Function Switch to " VOLT" position. 1. Auto power off: approx. 8 minutes. Power is supplied by two button-type batteries (NEDA Before taking any measurements, read the Safety 2. Press Mode switch to toggle between "DC" and "AC". 2.