Table of Contents
Advertisement
Operation
Display
Import / Export Power
1
House Load Power
2
Status Text
3
Generation Power
4
Lock Icon
5
Date & Time
6
Mode Icons
7
zappi
Icon
8
Charge Mode
9
Charge Delivered to EV
10
Current Charging Power
11
Green Level of last charge
12
zappi
8
3
4
5
6
7
8
The power being either imported or exported from or to the grid (kW). The
direction of the arrows indicate if the property is currently importing power (left)
or exporting power (right)
The size of arrows is proportion to the level of power. When the property is
neither importing or exporting power, the figure will be 0.0kW and there will no
animated arrows. The property is then said to be 'in balance'
The power that the property is currently using in kW
It does not include any surplus power being sent to the heater(s)
Note: This is displayed only when the Generation Sensor is installed (either connected to CT2 input or a
harvi device)
The current status is displayed here (see Status Screens page 10)
The power being generated at this time in kW
Note: This is displayed only when the Generation Sensor is installed (either connected to CT2 input or a
harvi device)
Operation lock is active
The current date and time
These icons indicate that the import limiting is active (house) or the e-Sense input
is live (e)
This
zappi
limiting (the output power will be temporarily reduced)
Shows the selected Charging Mode; FAST, ECO or ECO+ (see Charging Modes page
11)
The accumulated charge energy that has been sent to EV in this charge session
When the EV is charging, arrows will show here along with the charging power in
kW
This is percentage of 'Green' energy for the last charge session, this is shown at
the end of a charge or when the EV is unplugged
2
9
unit. If there are wavy lines above the icon, the unit is thermally
operation and installation manual
1
12
11
10
Hide quick links:
Advertisement
Table of Contents
