Overview - zappi -32A1P1T05 Operation & Installation Manual

Overview

Microgeneration systems such as Solar PV and small wind turbines are at their most efficient when the generated energy is
consumed on-site rather than exporting it to the grid. This is what we call 'self-consumption'.
zappi is a Mode 3 charging station, compatible with all electric vehicles that comply with SAE J1772, EN62196 and EN61851
plug-in electric vehicle standards.
zappi works like any regular charging point but has special eco charging modes which will benefit homeowners with grid-tied
microgeneration systems, like wind or solar generation. Two special ECO charging modes automatically adjust charging current
in response to on-site generation and household power consumption. In FAST charge mode,
charging.
A grid current sensor (supplied) simply clips around the incoming supply cable. This sensor is used to monitor excess power and
when using the special ECO charge modes,
Feature Set
Available with Type 1 or Type 2 connector
•
3 charging modes: ECO, ECO+ & FAST
•
Optimises microgeneration self-consumption
•
Works with solar PV or wind turbine systems
•
Economy tariff sense input
•
Programmable timer function
•
Charge and event logging
•
Remote control and monitoring add-on option
•
Pin-code lock function
•
Tap operated display backlight
•
Built-in RCD protection
•
Integral cable holster
•
Supplied with clip-on grid current sensor
•
Overview Diagram
The diagram over the page, shows the
shown and how they integrate with the grid connection and the microgeneration system.
operation and installation manual
zappi automatically adjusts the charge rate in response to available surplus.
zappi as part of a complete energy management system. Other
Introduction
zappi operates like an ordinary EV
myenergi products are
zappi
5